|
Hardinge DSM-59
Listed For Sale at MachineKs.com in category - Second Operation Lathes. |
|
|
| |
|
| 9" Swing Hardinge DSM-59 SECOND OP LATHE, Vari-Speed,5C-Collet Closer,Turret & Cross Slide |
| Ad Id#: | 11009 | | Seller Ref.# | 139971 | | Model: | DSM-59 | | Make: | Hardinge | | Year: | 1982 ( Used ) | | Price: | $8,950.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|
 |
| Description: |
HARDINGE SECOND OPERATION LATHE,
MODEL DSM-59, S/N DV-59-16881, NEW 1982
SPECIFICATIONS:
SPINDLE CAPACITY WITH ROUND 5C COLLETS .. 1-1/16"
HEXAGON 5C COLLETS ...................... 7/8"
SQUARE 5C COLLETS ....................... 3/4"
STEP CHUCKS ............................. 1-1/16" TO 6"
JAW CHUCKS .............................. 5"
JAW CHUCKS THROUGH SPINDLE .............. 1-5/32"
SPINDLE NOSE ............................ 2-3/16" - R.H.
LENGTH OF BED ........................... 36"
SWING OVER BED .......................... 9"
TRAVEL OF DOUBLE TOOL CROSS SLIDE ....... 3-3/4"
TRAVEL OF TURRET SLIDE .................. 4"
DIAMETER OF TURRET HOLES ................ 5/8"
VARIABLE SPINDLE SPEED RANGE ............ 230 TO 3,500 RPM
APPROXIMATE WEIGHT ...................... 1,100 LBS.
EQUIPPED WITH:
- HEXAGON TURRET
- DOUBLE TOOL CROSS SLIDE WITH (2) TOOL BLOCKS AND
(1) TOOL HOLDER
- PUSH BUTTON CONTROL FOR VARIABLE SPEED
- BALL BEARING LEVER COLLET CLOSER WITH (6) TYPE 5C COLLETS
- SELF-CONTAINED COOLANT SYSTEM
- 3/4-3/8 H.P. 3/60/230 VOLT TWO-SPEED MAIN DRIVE MOTOR
AND ELECTRICAL CONTROLS |
|
|
NOTE: Displayed on page Hardinge DSM-59 9" Swing Hardinge DSM-59 SECOND OP LATHE, Vari-Speed,5C-Collet Closer,Turret & Cross Slide is listed under ID# 11009 by Machinery Values Inc. in category Second Operation Lathes. For any additional info regarding this Hardinge DSM-59 please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
