|
Hardinge HLVH-EM
Listed For Sale at MachineKs.com in category - Precision Lathes. |
|
|
| |
|
| 11" Swing 18" Centers Hardinge HLVEM PRECISION ENGINE LATHE |
| Ad Id#: | 11018 | | Seller Ref.# | 143778 | | Model: | HLVH-EM | | Make: | Hardinge | | Year: | 1992 ( Used ) | | Price: | On Request | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|
 |
| Description: |
HARDINGE SUPER PRECISION TOOL ROOM LATHE
MODEL: HLVH-EM, S/N: 14561-T, NEW: 1992
SPECIFICATIONS:
SPINDLE CONSTRUCTION ................. HARDINGE BALL BEARING
SPINDLE NOSE ......................... HARDINGE TAPER SPINDLE CAPACITY:
WITH ROUND TYPE 5C COLLETS ..... 1-1/16"
WITH STEP CHUCKS ............... 1-1/16" TO 6"
WITH JAW CHUCKS ................ 5"
WITH EXPANDING COLLETS ......... 3"
VARIABLE SPINDLE SPEEDS .............. 125 - 3,000 R.P.M.
HOLE THROUGH SPINDLE ................. 1-1/4"
SWING OVER BED ....................... 11"
SWING OVER CARRIAGE .................. 9"
SWING OVER CROSS SLIDE ............... 6"
DISTANCE BETWEEN CENTERS ............. 18"
COMPOUND SLIDE TRAVEL ................ 3"
CARRIAGE POWER FEED RANGE ............ 5/16 - 7 I.P.M.
CROSS SLIDE POWER FEED RANGE ......... 3/16 - 4 I.P.M.
TAILSTOCK SPINDLE DIAMETER ........... 1-3/8"
TAILSTOCK SPINDLE TAPER .............. #2 MT
INCH THREADING RANGE IN GEARBOX (36) . 11 - 108 T.P.I.
METRIC THREADING RANGE IN GEARBOX (36) 0.275 - 2.7 MM
APPROXIMATE WEIGHT ................... 1,700 LBS.
EQUIPPED WITH:
- DUAL GEARBOX FOR PRECISION ENGLISH OR METRIC THREAD CUTTING
- DUAL READING INCH/METRIC DIAL FOR COMPOUND AND TAILSTOCK
- BALL BEARING QUICK ACTING 5C COLLET CLOSER
- ACCU-RITE TWO-AXIS DIGITAL READOUT
- HARDINGE 3-JAW CHUCK
- HARDINGE 4-JAW CHUCK
- MISC. 5-COLLETS
- ALBRECHT DRILL CHUCK FOR TAILSTOCK
- QUICK CHANGE TOOLPOST
- SELF-CONTAINED COOLANT SYSTEM WITH TRANSPARENT CHIP AND COOLANT SHIELD
- WORK LIGHT
- .5 - 1 H.P. 3/60/460 VOLT TWO-SPEED MAIN DRIVE MOTOR AND ELECTRICAL CONTROLS
INSPECT UNDER POWER
CONDITION: MINT |
|
|
NOTE: Displayed on page Hardinge HLVH-EM 11" Swing 18" Centers Hardinge HLVEM PRECISION ENGINE LATHE is listed under ID# 11018 by Machinery Values Inc. in category Precision Lathes. For any additional info regarding this Hardinge HLVH-EM please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
