| Sharp 1118CNC
Listed For Sale at MachineKs.com in category - CNC Lathes, Flat Bed. |
|
|
| |
|
| 11" Swing 18" Centers Sharp 1118 CNC Plus CNC LATHE, | | Ad Id#: | 11155 | | Seller Ref.# | 124684 | | Model: | 1118CNC | | Make: | Sharp | | Year: | ( Used ) | | Price: | $39,900.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|  | | Description: |
"NEW" SHARP MODEL: 1118CNC Plus
CNC TOOLROOM LATHE
Specifications: 1118CNC Plus
Chuck size 5C
Swing over bed 11"
Max. turning length 18"
Swing over cross slide 2.75"
Tooling Gang stlye
X travel 9"
Z travel 5"
Spindle bore 1.25"
Bar capacity 0.6875"
Spindle HP 5
Spindle nose 4 deg. Hardinge
Spindle RPM 0-4000
No. of speed ranges 1
Tool OD & ID size 1/2"
Type of ways Linear
Rapid traverse 394 ipm
CNC control Anilam 4200T
Tailstock quill dia. 1.36"
Tailstock quill travel 3.75"
Net weight 2,300 lbs
Accuracy +/- 0.000,080"
Repeatability 0.000,040"
Country of Origin Taiwan
Featuring:
Spindle runout - 0.000,050" TIR
Oversized cross slide
2 Front mounted MPGs
Ballscrews are supported on both ends by angular contact bearings
Full CNC or manual operation
Specifications:
X axis travel - 8.65"
Z axis travel - 11.2"
Spindle speed range - 0-4000 RPM
Tailstock quill taper - MT2
AC servo motors - Yaskawa, 1 HP each
Constant surface speed
Ballscrew dias. - 1"Z, 0.75"X
Spindle motor - 5 HP
Spindle nose - 5C Collet mount
Rapid traverse - 394 ipm
Max. feed rate - 200 ipm
Tooling - Gang Style (std.) or Quick change tool post (opt.)
Standard Anilam 4200T CNC control features: PC Based CNC control
12.1" TFT Color Active Matrix Screen
8 GB Hard drive
3.5" Floppy Disc
Manual, semi-auto, auto and single-step modes
Conversational programming
G code programming
Teach-in capability
Canned cycles
Shape editor
Standard machine items:
CNC threading with multiple lead capability
Tailstock with tang in quill
Full length rear splash guard
Pull down chip cover
Auto lube with low level indicator
Coolant system
Pneumatic Collet closer system with foot control
Halogen work light
Gang type tooling mounting plate, 6 x 12"
220 volts std. (440 v. opt.) |
|
|
NOTE: Displayed on page Sharp 1118CNC 11" Swing 18" Centers Sharp 1118 CNC Plus CNC LATHE, is listed under ID# 11155 by Machinery Values Inc. in category CNC Lathes, Flat Bed. For any additional info regarding this Sharp 1118CNC please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
|
