|
Daewoo Puma 230MC
Listed For Sale at MachineKs.com in category - CNC Turning Centers - CNC Lathes. |
|
|
| |
|
| 10" Swing 22.8" Centers Daewoo Puma 230MC CNC LATHE, Fanuc 18iT, Full C-axis, Parts Catch, Tail, Chip |
| Ad Id#: | 11195 | | Seller Ref.# | 143072 | | Model: | Puma 230MC | | Make: | Daewoo | | Year: | 2002 ( Used ) | | Price: | On Request | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|
 |
| Description: |
DAEWOO PUMA 230MC CNC TURNING CENTER
NEW: 2002
SWING OVER BED .................... 21.7"
SWING OVER SADDLE ................. 15.4"
MAX. TURNING DIAMETER ............. 11.4"
MAX. TURNING LENGTH ............... 18.8"
X-AXIS TRAVEL ..................... 8.1"
Z-AXIS TRAVEL ..................... 22.8"
SPINDLE SPEED MAX. ................ 3500 RPM
SPINDLE NOSE ...................... A2#6
MAX. BAR CAPACITY ................. 3.03"
C-AXIS INDEX ANGLE ................ 0.001 DEG.
SPINDLE MOTOR ..................... 20HP
TURRET TOOL STATIONS .............. 12
OD TOOL SIZE ...................... 1"
BORING BAR DIAMETER ............... 1.5"
MILLING SPINDLE SPEED ............. 6,000 RPM
RAPID TRAVERSE X/Z ................ 945/1200 IPM
TAILSTOCK QUILL DIA. .............. 3"
TAILSTOCK QUILL TRAVEL ............ 3.15"
APPROX. WEIGHT .................... 9,500 LBS.
APPROX. DIMENSIONS ................ 160" x 66" x 72"
EQUIPPED WITH:
- FANUC 18iT CNC CONTROL
- 10" 3-JAW HYD. CHUCK
- AUTOMATIC TOOL SETTER
- PROGRAMMABLE PARTS CATCHER
- 12 POSITION TURRET
- TAILSTOCK
- CHIP CONVEYOR |
|
|
NOTE: Displayed on page Daewoo Puma 230MC 10" Swing 22.8" Centers Daewoo Puma 230MC CNC LATHE, Fanuc 18iT, Full C-axis, Parts Catch, Tail, Chip is listed under ID# 11195 by Machinery Values Inc. in category CNC Turning Centers - CNC Lathes. For any additional info regarding this Daewoo Puma 230MC please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
