| ANCA CNC FASTGRIND EG3
Listed For Sale at MachineKs.com in category - Universal Cylindrical Grinders. |
|
|
| |
|
| Anca EG3 FASTGRIND CNC OD GRINDER, FASTGRIND SYSTEM 32 CNC, CNC "C" & "B" AXES | | Ad Id#: | 11368 | | Seller Ref.# | 134522 | | Model: | FASTGRIND EG3 | | Make: | ANCA CNC | | Year: | 1992 ( Used ) | | Price: | On Request | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|  | | Description: |
ANCA CNC CYLINDRICAL GRINDER
MODEL: FASTGRIND EG3
S/N: 321584
NEW: 1992
SPECIFICATIONS:
POLYMER CONCRETE CASTING
WHEELHEAD MOVES IN TWO AXES (X & Z)
GRINDING SPINDLE- 10 HP AC
INF. VARIABLE WHEELHEAD SPINDLE SPEEDS (0 TO 2,500 RPM)
12" TO 16" GRINDING WHEEL DIAMETER x 3.2" WIDE.
WHEEL BORE IS 5".
X-AXIS TRAVEL (WHEELHEAD IN & OUT) IS 8.25", MAX. SPEED IS
300" IPM, ENCODER RESOLUTION IS .000004".
PRELOADED LINEAR RALES , BALLSCREW (40mm DIA.) DRIVEN
BY DC SERVO MOTOR
Z-AXIS MAX. TRAVEL (WHEELHEAD MOVING LEFT & RIGHT) IS 10",
ENCODER RESOLUTION IS .000004"
SLIDING STEEL GUARDS FOR PROTECTING WAY SURFACES
WORKHEAD HAS INFINITELY VARIABLE SPINDLE SPEEDS FROM
0 TO 820 RPM
AS AN AXIS, THE WORKHEAD IS CAPABLE OF MOVING AT A SPEED
OF UP TO 8,000 DEGREES/MIN. THE RESOLUTION OF THE AXIS
IS 0.015 DEGREES.
WORKHEAD SPINDLE TAPER IS #4MT, WORKHEAD SPINDLE IS DUAL
LIVE/DEAD,
WORKHEAD IS CAPABLE OF OPERATING BOTH AS A SPINDLE
(IDENTIFIED AS "SPINDLE 3) AND AS AN AXIS (C-AXIS).
THIS PROVIDES OPERATIONS FOR BOTH CYLINDRICAL GRINDING
& CREEPFEED GRINDING.
WORKHEAD HAS A PNEUMATICALLY POWERED COLLET CHUCK.
TAILSTOCK SPINDLE TAPER IS #3MT WITH 1.5" QUILL TRAVEL.
WEIGHT CAPACITY IS 110 LBS., TAPER ADJUSTMENT IS
+/- .002", & THE TAILSTOCK HAS A HYDRAULIC ACTUATOR.
AUTOMATIC DYNAMIC WHEEL BALANCING SYSTEM
DIAMOND PLATED ROTARY DRESSING DEVICE. THIS DEVICE IS
POWER DRIVEN. DRESSER SHAFT IS 1.4" DIAMETER.
TOTAL LENGTH OF THE DRESSING ROLL IS 5".
ANCA FASTGRIND SYSTEM 32 CNC CONTROL
CONVERSATIONAL "G_CAM" PART PROGRAMMING - SIMPLE PART
PROGRAM WHICH SETS THE PARAMETERS, AND THEN CALLS
THE APPROPRIATE CYCLE FOR EACH PARTICULAR SECTION
OF THE WORKPICE. THE PARAMETERS, AND THE CYCLES CALLED,
ARE ULTIMATELY SPECIFIED BY THE OPERATOR, WITH AN
ASSISTANCE FROM THE CONTROL THROUGH "G_CAM".
FLOPPY DISC DRIVE & RS-232 INTERFACE
EDGE DETECTION SENSING
MACHINE ENCLOSURE
COOLANT SYSTEM WITH FILTRATION
** MACHINE BOOKS/DOCUMENTATION **
** EXCELLENT CONDITION & APPEARANCE **
|
|
|
NOTE: Displayed on page ANCA CNC FASTGRIND EG3 Anca EG3 FASTGRIND CNC OD GRINDER, FASTGRIND SYSTEM 32 CNC, CNC "C" & "B" AXES is listed under ID# 11368 by Machinery Values Inc. in category Universal Cylindrical Grinders. For any additional info regarding this ANCA CNC FASTGRIND EG3 please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
|
