[ ← GO TO AD ]

Scotchman CPO 275 LT


Listed For Sale at MachineKs.com in category - Cold Saws & Carbide Saws (Ferrous).
 
[ TRANSLATOR ]
10.75Inch Blade 2 HP Scotchman CPO 275 LT COLD SAW, 2 Speed
 Ad Id#: 13705
 Seller Ref.# 136606
 Model: CPO 275 LT
 Make: Scotchman
 Year: ( New )
 Price: $4,495.00
 Location: USA
Ad Status:CLOSED
Listed By:Machinery Values Inc.
 Address: 
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
 Description: 
NEW SCOTCHMAN COLD SAW MODEL CPO-275 LT

STANDARD FEATURES
Manual Double Self-Centering Vise Assures Burr-Free Cuts
Operator Controlled Trigger Switch
Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
Miter Locking Device stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right
Capable of Slotting
Two Cutting Speeds
Hardened and Ground Worm and Wheel Gear Box
Worm Wheel of Top Quality Bronze
7 Gallon Coolant Tank with Pump
30Inch Material Length Stop
One 10Inch Diameter (250 mm) HSS Blade
One Blade Wrench
One Gallon Concentrated Coolant
230 or 460 Volt/3 Phase Electrics (must specify voltage)
Warranty: One Year Parts
Made in USA

Capacities & Specifications

Cutting Speeds LT (Low Turn) designed for solid mild steel, solid
stainless steel & thick wall pipe (Must specify when ordering):
LT (Low Turn) 30 RPM or 60 RPM
Motor Rate: 2 hp

TUBING 90 DEGREES:
Round: 3-3/8Inch
Square: 3Inch x 3Inch
Rectangle: 3-1/2Inch x 2-3/8Inch

TUBING 45 DEGREES:
Round: 2-3/4Inch
Square: 2-5/8Inch x 2-5/8Inch
Rectangle: 2-5/8Inch x 2-5/8Inch

Max Dia Blade: 10-3/4Inch
Arbor Bore: 1-1/4Inch
Pin Spacing: 2/8/45
Width: 21-7/8Inch
Depth: 43-1/2Inch
Height Not Including Handle: 53-1/4Inch
Height From Floor To Vise: 36-1/8Inch
Shipping Weight: 600 lbs.
 


NOTE: Displayed on page Scotchman CPO 275 LT 10.75Inch Blade 2 HP Scotchman CPO 275 LT COLD SAW, 2 Speed is listed under ID# 13705 by Machinery Values Inc. in category Cold Saws & Carbide Saws (Ferrous). For any additional info regarding this Scotchman CPO 275 LT please contact directly Machinery Values Inc..

© MACHINEKS.COM All Rights Reserved