[ ← GO TO AD ]

Sharp 1440V

Listed For Sale at MachineKs.com in category - New Lathes.

[ TRANSLATOR ]

14Inch Swing 40Inch Centers Sharp 1440V ENGINE LATHE, Digital Variable Speed

Ad Id#:	13757
Seller Ref.#	136736
Model:	1440V
Make:	Sharp
Year:	( New )
Price:	$10,895.00
Location:	USA

Ad Status:

CLOSED

Listed By:

Machinery Values Inc.

Address:

401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501

Description:

NEW SHARP PRECISION LATHE MODEL: 1440V w/Digital Variable Speed FEATURES - variable speed spindle drive with digital display - hi-low gear shift for spindle speed, range from 30 - 2,200 RPM - hardened & ground gears in headstock - jog button for easy engagement of gears - induction hardened & ground bedways for rigid structure - spindle supported by 2 high precision tapered roller bearings - carriage equipped with overload clutch to protect gears & screws - available for 3 phase or single phase electrics operation - electrically activated foot brake for quick stopping action - built-in cabinet for tools storage CAPACITY Swing over bed: 14Inch Swing over crosslide: 8-5/8Inch Swing over gap, width: 20Inch Width of bed: 8-1/2Inch Distance between centers: 40Inch HEADSTOCK Spindle nose type: D1-4 Camlock Spindle bore: 1-1/2Inch Spindle Speeds: 30 - 2,200 RPM Taper of spindle bore: MT #5 THREADS & FEEDS Longitudinal feeds - inch per rev (40): 0.0012 - .0294Inch Cross feeds - in/rev (40): 0.0003 - 0.01Inch Inch threads (40): 4 - 112 TPI Metric threads (22): 0.45 - 7.5mm Leadscrew pitch, diameter: 8 TPI, 7/8Inch CARRIAGE Saddle width: 13-1/4Inch Apron width: 11Inch Cross slide width: 6-3/4Inch Cross slide travel: 7Inch Compound rest travel: 4Inch Compound width x length: 3-1/2 x 8-1/2 BED Bed length: 66Inch Bed width: 8-1/8Inch TAILSTOCK Quill travel (graduated): 4-1/2Inch Quill diameter: 1-3/4Inch Quill taper: MT #3 GENERAL Motor: 3 hp (220 Volts, Your Choice of Single Phase or 3 Phase) 440 Volt Operation requires an optional transformer Net weight (approximately): 1,650 lbs STANDARD EQUIPMENT coolant system, 4-way toolpost, steady rest, thread dial, foot brake, center sleeve (MT #5 x #3), dead centers (MT #3) tool kit, removable gap block & splash guard. OPTIONAL EQUIPMENT (Call for prices) Follow rest, digital readout system, taper attachment, micrometer carriage stop, 3-jaw scroll chuck (8Inch), 4-jaw chuck (8Inch), face plate (12Inch), single toolpost, live center (MT #3), & drill chuck.

NOTE: Displayed on page Sharp 1440V 14Inch Swing 40Inch Centers Sharp 1440V ENGINE LATHE, Digital Variable Speed is listed under ID# 13757 by Machinery Values Inc. in category New Lathes. For any additional info regarding this Sharp 1440V please contact directly Machinery Values Inc..