[ ← GO TO AD ]

Sharp 1440F

Listed For Sale at MachineKs.com in category - New Lathes.

[ TRANSLATOR ]

14Inch Swing 40Inch Centers Sharp 1440F ENGINE LATHE, 16 Speed Headstock

Ad Id#:	13758
Seller Ref.#	136738
Model:	1440F
Make:	Sharp
Year:	( New )
Price:	$9,895.00
Location:	USA

Ad Status:

CLOSED

Listed By:

Machinery Values Inc.

Address:

401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501

Description:

NEW SHARP PRECISION LATHE MODEL: 1440F FEATURES - hardened & ground bed ways - jog button for easy engagement of gears & inching spindle - larger compound, tailstock & apron than competitive models allows heavier cutting with less vibration - 16 speed (InchFInch models), all geared headstock housed inside a sturdy cast iron base - quick-change gearbox offers wide range of threads CAPACITY Swing over bed: 14Inch Swing over crosslide: 8-5/8Inch Swing over gap, width: 20Inch Width of bed: 8-1/2Inch Distance between centers: 40Inch HEADSTOCK Spindle nose type: D1-4 Camlock Spindle bore: 1-1/2Inch Spindle Speeds: 45 - 1,800 RPM (16 speeds) Taper of spindle bore: MT #5 THREADS & FEEDS Longitudinal feeds - inch per rev (40): 0.0012 - .0294Inch Cross feeds - in/rev (40): 0.0003 - 0.01Inch Inch threads (40): 4 - 112 TPI Metric threads (22): 0.45 - 7.5mm Leadscrew pitch, diameter: 8 TPI, 7/8Inch CARRIAGE Saddle width: 13-1/4Inch Apron width: 11Inch Cross slide width: 6-3/4Inch Cross slide travel: 7Inch Compound rest travel: 4Inch Compound width x length: 3-1/2 x 8-1/2 BED Bed length: 66Inch Bed width: 8-1/8Inch TAILSTOCK Quill travel (graduated): 4-1/2Inch Quill diameter: 1-3/4Inch Quill taper: MT #3 GENERAL Spindle motor: 3 hp SPECIFY: 220V or 440V, 3 Ph, 60 Hz Net weight (approximately): 1,650 lbs STANDARD EQUIPMENT coolant system, 4-way toolpost, steady rest, thread dial, foot brake, center sleeve (MT #5 x #3), dead centers (MT #3) tool kit, removable gap block & splash guard. OPTIONAL EQUIPMENT (Call for prices) Follow rest, digital readout system, taper attachment, micrometer carriage stop, 3-jaw scroll chuck (8Inch), 4-jaw chuck (8Inch), face plate (12Inch), single toolpost, live center (MT #3), & drill chuck.

NOTE: Displayed on page Sharp 1440F 14Inch Swing 40Inch Centers Sharp 1440F ENGINE LATHE, 16 Speed Headstock is listed under ID# 13758 by Machinery Values Inc. in category New Lathes. For any additional info regarding this Sharp 1440F please contact directly Machinery Values Inc..