|
Sharp SG-618
Listed For Sale at MachineKs.com in category - New Surface Grinders. |
|
|
| |
|
| 6Inch Width 18Inch Length Sharp SG-618 SURFACE GRINDER, HAND FEED PRECISION |
| Ad Id#: | 13827 | | Seller Ref.# | 136862 | | Model: | SG-618 | | Make: | Sharp | | Year: | ( New ) | | Price: | $7,950.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|
 |
| Description: |
NEW SHARP HAND FEED PRECISION SURFACE GRINDER
MODEL: SG-618
CAPACITY
Maximum grinding length: 18.5Inch
Maximum grinding width: 6.3Inch
Maximum distance: table to spindle center: 16Inch
TABLE
Working Surface (W x L): 6 x 18.3Inch
Maximum longitudinal travel: 18.9Inch
Maximum cross travel: 7Inch
FEED
LONGITUDINAL MOVEMENT OF TABLE
Hand feed per revolution: 4.2Inch
CROSS MOVEMENT OF SADDLE
Hand feed per revolution: .02Inch
Graduation of hand wheel: 0.001Inch
VERTICAL MOVEMENT OF WHEEL HAND
Hand feed per revolution: 0.05Inch
Graduatin of hand wheel: 0.0001Inch
SPINDLE AND WHEEL
Spindle motor: 1-1/2 hp (wired either 220v or 440v, please specify)
Spindle speed: 3,600 RPM
Grinding wheel outside diameter: 8Inch
Grinding wheel bore: 1.25Inch
Grinding wheel width: 0.63Inch
GENERAL
Floor space (W x H x L): 83 x 40 x 48Inch
Net weight (approximately): 1,600 lbs.
FEATURES
One InchVInch and one flat way for longitudinal travel: both ways are
hand-scraped and covered with Turcite B coating
Accurate slot grinding achieved using saddle locking system
Double-nut backlash eliminator
Cross slide and column screws are hardened and ground to a 70
Rockwell C hardness
Wire rope-driven table
main spindle runout within 0. 0001Inch
Automatic lubrication system
STANDARD EQUIPMENT:
Grinding Wheel (8Inch x 1.25Inch x 0.63Inch)
Wheel adaptor/flange
Work light
Wheel Balancing arbor
Diamond dresser
Tool kit
OPTIONAL (EXTRA COST) ACCESSORIES
Permanent magnetic chuck - coarse or fine pole (Kanetsu)
Electro-magnetic chuck with control (Kanetsu or Walker)
Spare wheel adaptor
Coolant systems with or without paper filtration
Dust collector
Parallel dresser
Wheel Balancing stand
Splash Guards for coolant
Digital readout system (Sony, Acu-Rite or Newall available) |
|
|
NOTE: Displayed on page Sharp SG-618 6Inch Width 18Inch Length Sharp SG-618 SURFACE GRINDER, HAND FEED PRECISION is listed under ID# 13827 by Machinery Values Inc. in category New Surface Grinders. For any additional info regarding this Sharp SG-618 please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
