|
Sharp SG-618 2A
Listed For Sale at MachineKs.com in category - New Surface Grinders. |
|
|
| |
|
| 6Inch Width 18Inch Length Sharp SG-618 2A SURFACE GRINDER, 2 Axis Hydraulic |
| Ad Id#: | 13829 | | Seller Ref.# | 136870 | | Model: | SG-618 2A | | Make: | Sharp | | Year: | ( New ) | | Price: | $13,995.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|
| Description: |
NEW SHARP PRECISION SURFACE GRINDER
MODEL: SG-618 2A - 2 AXIS Hydraulic (photo is of the
3 Axis model)
CAPACITY
Maximum grinding length: 19.7Inch
Maximum grinding width: 5.9Inch
Maximum distance: table to spindle center: 15.7Inch
TABLE
Working Surface (W x L): 5.9 x 18.3Inch
Maximum longitudinal travel: 21.6Inch
Maximum cross travel: 7Inch
FEED
LONGITUDINAL MOVEMENT OF TABLE
Hydraulic feed: 3.3 - 82 FPM
Hand feed per revolution: 2.7Inch
CROSS MOVEMENT OF TABLE
Intermittent feed: 0.006 - 0.3Inch
Continuous transverse feed: 47.2 IPM
Hand feed per revolution: .02Inch
Graduation of hand wheel: 0.0005Inch
VERTICAL MOVEMENT OF WHEEL HEAD
Hand feed per revolution: 0.04Inch
Graduation of hand wheel: 0.0001Inch
Rapid feed: 1.1 - 9 IPM
SPINDLE AND WHEEL
Spindle motor: 1-1/2 hp (220v or 440v 3ph /60 cycle)
Spindle speed: 3,600 RPM
Grinding wheel outside diameter: 8Inch
Grinding wheel bore: 1.25Inch
Grinding wheel width: 0.63Inch
GENERAL
Motor (hydraulic): 1.0 hp
Floor space (W x H x L): 83 x 51 x 80Inch
Net weight (approximately): 2,200 lbs.
FEATURES
DOUBLE V WAYS FOR CROSS TRAVEL AND ONE V, ONE FLAT
WAY FOR LONGITUDINAL TRAVEL-BOTH WAYS ARE HAND-
SCRAPED AND COVERED WITH TURCITE InchBInch COATING
AUTOMATIC CROSS FEED
ACCURATE SLOT GRINDING ACHIEVED USING SADDLE
LOCKING SYSTEM COMBINED WITH CROSS FEED BALL SCREW
AUTOMATIC LUBRICATION SYSTEM
ADVANCED HYDRAULIC SYSTEM WITH INDEPENDENT OIL TANK
PROVIDES VIBRATION-FREE TABLE MOVEMENT
HYDRAULIC TABLE STROKE SETTING
STANDARD EQUIPMENT:
Grinding Wheel
Wheel adapter
Work light
Balancing arbor
Diamond dresser
Tool kit
OPTIONAL (EXTRA COST) ACCESSORIES
Permanent magnetic chuck - coarse or fine pole (Kanetsu)
Electro-magnetic chuck with control (Kanetsu or Walker)
Spare wheel adaptor
Coolant systems with or without paper filtration
Dust collector
Parallel dresser
Wheel Balancing stand
Splash Guards for coolant
Digital readout system (Sony, Acu-Rite or Newall available)
10Inch x 3/4Inch Grinding Wheel (With Inverter Spindle Drive)
|
|
|
NOTE: Displayed on page Sharp SG-618 2A 6Inch Width 18Inch Length Sharp SG-618 2A SURFACE GRINDER, 2 Axis Hydraulic is listed under ID# 13829 by Machinery Values Inc. in category New Surface Grinders. For any additional info regarding this Sharp SG-618 2A please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|