|
Sharp OD1022S
Listed For Sale at MachineKs.com in category - New Cylindrical Grinders. |
|
|
| |
|
| 10Inch Dia. 22Inch Length Sharp OD1022S OD GRINDER, Automatic Infeed system |
| Ad Id#: | 13866 | | Seller Ref.# | 136913 | | Model: | OD1022S | | Make: | Sharp | | Year: | ( New ) | | Price: | $57,550.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|
| Description: |
NEW SHARP UNIVERSAL CYLINDRICAL GRINDER
w/Servo Driven Ballscrew, Touch Screen Control
Automatic Wheelhead Infeed System
MODEL: OD1022S
SPECIFICATIONS
CAPACITY
Swing over table: 10.6Inch
Distance between centers: 22Inch
Maximum grinding diameter: 10Inch
Maximum load between centers: 280 lbs.
WHEELHEAD
Infeed range: 10Inch
Auto infeed range: 0.0001Inch - 0.04Inch
Rapid forward and retract: 1.6Inch
Auto feed rate: 0.04 - 2 IPM
Manual feed, graduation (dia): 0.08Inch
Manual feed, revolution (dia): 0.0002Inch
Swivel angle: +/- 15 degree
GRINDING WHEEL
Diameter x width x bore: 16Inch x 1.5Inch x 5Inch
Wheel speed: 1650 RPM
WORKHEAD
Spindle speed (infinitely variable): 50 - 350 RPM
Swivel angle: +90 degrees
Taper of center: MT#4
TABLE
Auto feed (variable speed): 2 - 160 IPM
Manual feed: 0.5
Swivel towards operator: 4 deg
Swivel away operator: 9 deg
TAILSTOCK
Quill travel: 1Inch
Taper of center: MT#4
MOTORS
Wheel drive: 5 hp
Workhead drive: 0.5 hp
Hydraulic pump drive: 1 hp
Coolant pump: 0.25 hp
GENERAL
Height: 6.5
Weight (approximately): 5,000 lbs.
* Other Models Available: 6, 8, 12, and 14Inch swing: 18-100Inch capacities
FEATURES & STANDARD EQUIPMENT
- Grinding wheel with flange
- Fixed and rotary type spindle on workhead
- Wheel extractor
- Dead center
- Balancing arbor
- Diamond dresser on workhead
- Work light
- Dial guard
- Front splash guard
- Tool kit
OPTIONAL ACCESSORIES (CALL FOR PRICING):
- Internal grinding attachment
- 3 Jaw (6Inch) jaw chuck with backplate
- Magnetic chuck (6Inch) with backplate
- Balancing stand
- Fully-enclosed splash guard
- Automatic sizing attachment
- Touch probe* Angle truing attachment
- Automatic wheel balance
- Coolant system with magnetic separator
- Spare wheel flange |
|
|
NOTE: Displayed on page Sharp OD1022S 10Inch Dia. 22Inch Length Sharp OD1022S OD GRINDER, Automatic Infeed system is listed under ID# 13866 by Machinery Values Inc. in category New Cylindrical Grinders. For any additional info regarding this Sharp OD1022S please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|