| Birmingham DL-26120
Listed For Sale at MachineKs.com in category - New Lathes. |
|
|
| |
|
| 26Inch Swing 120Inch Centers Birmingham DL-26120 ENGINE LATHE, 20 HP, 18 Speed, 4 | | Ad Id#: | 14049 | | Seller Ref.# | 137428 | | Model: | DL-26120 | | Make: | Birmingham | | Year: | ( New ) | | Price: | $25,250.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
| | Description: |
New Birmingham 26Inch x 120Inch Heavy Duty Engine Lathe
Model: DL-26120 4-1/8Inch Spindle Bore!!
SPECIFICATIONS:
Swing over bed 26Inch
Swing over the cross slide: 13.8Inch
Swing in the gap: 31.5Inch
Between centers: 120Inch
Width of bed: 21-21/32Inch
Effective length in gap to spindle: 16Inch
Effective length in gap to chuck: 9-1/2Inch
Spindle bore: 4-1/8Inch
Spindle nose: D1-11 Camlock
Spindle speed range: 7.5-1000 RPM 7.5/10/13/18/23/31/43/56/75/100/132/178/240/310/420/
575/740/1000
Spindle speed numbers: 18 steps
Taper of spindle center: MT#5
Longitudinal Feeds: 0.002 - 0.96 IPR, 64 kinds
Cross Feeds: 0.001-0.48 IPR, 64 kinds
Inch Threads: 32-1/16 TPI, 73 kinds
Metric Threads: 1-256mm, 57 kinds
Module Threads: 0.5-128mm, 57 kinds
Diametral Pitch Threads: 32-1/8 DP, 57 kinds
Leadscrew Diameter/pitch: 2-1/4Inch, 2 TPI
Cross slide travel, max: 17-1/2Inch
Longitudinal Rapid Travel: 149Inch/min
Cross slide rapid travel: 74-1/2Inch/min
4-way tool post capacity: 1-1/4Inch x 1-1/4Inch
Quill Taper: MT#5
Quill Travel: 9-1/2Inch
Quill Diameter: 3-15/16Inch
Main Drive Motor: 20hp, 220v/440v, prewired 220v
Coolant pump motor: 1/8hp
Rapid traverse motor: 1-1/2hp
Overall Dimensions: 220Inch x 55Inch x 72InchH
Weight: 11,000 lbs
FEATURES:
18 speeds from 7.5 to 1000 RPM
D1-11 camlock with 4-1/8Inch spindle bore.
Main spindle hardened & precision ground.
Bed made of fine grain high tensile cast iron.
4-way rapid traverse to carriage & cross slide.
Bed ways induction hardened & precision ground.
All gears and shafts hardened & precision ground.
Spindle supported at 3-points by precision bearings.
Automatic lubrication system in headstock & feed box.
Hydr-control multi-disc clutch for spindle turning & brake.
Manufactured in China
Standard Equipment:
4-Way Rapid Traverse
14Inch Steady Rest w/Rollers
Follow Rest
12Inch 3 Jaw Chuck
20Inch 4 Jaw Chuck
4 Way Tool Post
31.5Inch Face Plate
12Inch Drive Plate
2 Dead Centers
Coolant System
Work Light
Reducing Headstock Sleeve
Foot Brake
One Piece Stand with Chip Tray
Full Length Splash Guard
Removable Gap Block Bed
Thread Chasing Dial
Inch/metric Gear Box, (no change gear required)
Set of Tools
Optional Equipment (call for pricing):
Taper Attachment
Smaller Steady Rest with Roller Jaws
Leveling Pads - USA InchUnisorbInch #LR-2500
Digital Readouts - Newall Topaz or Sargon Gold Standard
|
|
|
NOTE: Displayed on page Birmingham DL-26120 26Inch Swing 120Inch Centers Birmingham DL-26120 ENGINE LATHE, 20 HP, 18 Speed, 4 is listed under ID# 14049 by Machinery Values Inc. in category New Lathes. For any additional info regarding this Birmingham DL-26120 please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
|