|
Monarch VMC-150 w/ APC
Listed For Sale at MachineKs.com in category - Vertical Machining Centers. VMC's. |
|
|
| |
|
| 50Inch X Axis 36Inch Y Axis Monarch VMC-150 w/ APC VERTICAL MACHINING CENTER, Fan |
| Ad Id#: | 14412 | | Seller Ref.# | 142142 | | Model: | VMC-150 w/ APC | | Make: | Monarch | | Year: | 1991 ( Used ) | | Price: | $14,500.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|
 |
| Description: |
MONARCH VMC-150A w/ APC
1991
SERIAL NUMBER: 91528
MACHINE SPECIFICATIONS:
TABLE WORKING SURFACE.................... 30Inch x 60Inch
OVERALL TABLE SIZE....................... 34-1/2Inchx64-1/2Inch
TABLE TRAVEL, X-AXIS (LONGITUDINAL)...... 50Inch
TABLE TRAVEL, Y-AXIS (CROSS)............. 36Inch
SPINDLE SLIDE TRAVEL, Z-AXIS............. 10Inch
VERTICAL SLIDING HEAD ADJUSTMETN, W-AXIS. 23Inch
MIN./MAX. HEIGHT, SPINDLE NOSE TO TABLE.. 0Inch / 34Inch
DIST. CENTERLINE TO COLUMN............... 33-1/2Inch
TABLE LOAD CAPACITY...................... 3,000 LBS.
QUILL DIAMETER........................... 5-3/4Inch
QUILL TRAVERSE RATE...................... 400 IPM
QUILL FEED RATE.......................... 0.01 TO 400 IPM
SPINDLE TAPER............................ #45 ASA
SPINDLE SPEEDS........................... 30 TO 5,200 RPM
TABLE & SADDLE POSITION SPEED............ 400 I.P.M.
POWER ELEVATION OF HEAD, TRAVERSE RATE... 100 I.P.M.
EQUIPPED WITH:
FANUC 15MA CNC CONTROL
HYPERINDEX 360 DEGREE INDEXER
|
|
|
NOTE: Displayed on page Monarch VMC-150 w/ APC 50Inch X Axis 36Inch Y Axis Monarch VMC-150 w/ APC VERTICAL MACHINING CENTER, Fan is listed under ID# 14412 by Machinery Values Inc. in category Vertical Machining Centers. VMC's. For any additional info regarding this Monarch VMC-150 w/ APC please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
