| SIP MP-3K
Listed For Sale at MachineKs.com in category - Jig Borers. |
|
|
| |
|
| SIP MP-3K JIG BORER, SIP ROTARY TABLE, DRO, TOOLING | | Ad Id#: | 14436 | | Seller Ref.# | 142571 | | Model: | MP-3K | | Make: | SIP | | Year: | 1966 ( Used ) | | Price: | $7,500.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|  | | Description: |
SIP BRIDGE TYPE InchULTRA-HIGH PRECISIONInch JIG BORER
** MADE IN SWITZERLAND **
MODEL: MP-3K S/N: 444 NEW: 1966
WORKING RANGE:
Table Working Surface: 20-1/2Inch x 15Inch
Longitudinal Travel of Work Table: 18Inch
Transverse Travel of Spindle Saddle: 14Inch
Maximum Distance from Table Top to Spindle End: 24-1/2Inch
Free Space Between Uprights: 23-1/2Inch
SPINDLE:
Internal Taper: Morse 2
External Taper: Special Taper SIP 2E
(8) Spindle Speeds: 75, 125, 210, 340, 480, 770, 1250 & 2000 RPM
(6) Power Feeds: 0.0008Inch, 0.0016Inch, 0.0025Inch, 0.0035Inch, 0.005Inch & 0.007Inch
Drilling Capacity (In Cast Iron): 1Inch
Boring Capacity: 4Inch
Spindle Quill Travel: 6Inch
Travel of Vertical Slide: 15-3/8Inch
Overall Size: 60Inch L-R x 69Inch F-B x 82Inch H on 3Inch Blocks
Weight: Approx. 4,000 Lbs.
EQUIPPED WITH:
MITUTOYO 2-Axis Digital Readout Display with 1 um (1 Micron)
Glass Scales
SIP Model PD-3 Rotary Table (S/N: 392), 13- 3/4Inch Diameter, Height to Top of Face is 4- 7/8Inch
SIP Locating Microscope with 12.5X Lens, Unit Mounts on Spindle
SIP Locating Dial Indicator
Spotting Tool with Morse Taper Adaptor
Boring Had, Mounts in Spindle
Drill Chuck, Swiss Made, 1/64Inch to 25/32Inch Drilling Capacity
Presently Wired for 3 Phase, 60 Cycle, 220-440 Volts
** Exceptional Condition & Appearance **
** Inspect Under Power in our Harrison, N.J. Warehouse **
|
|
|
NOTE: Displayed on page SIP MP-3K SIP MP-3K JIG BORER, SIP ROTARY TABLE, DRO, TOOLING is listed under ID# 14436 by Machinery Values Inc. in category Jig Borers. For any additional info regarding this SIP MP-3K please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
|
