|
Moore G-18
Listed For Sale at MachineKs.com in category - Jig Grinders. |
|
|
| |
|
| 11Inch Y Axis 18Inch X Axis Moore G-18 JIG GRINDER, FACTORY RISER BLOCK & MATCHIN |
| Ad Id#: | 14706 | | Seller Ref.# | 145220 | | Model: | G-18 | | Make: | Moore | | Year: | 1980 ( Used ) | | Price: | $0.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|
 |
| Description: |
MOORE #G-18 JIG GRINDER
WITH FACTORY RISER BLOCK & MATCHING
AUXILLARY TABLE
S/N: G-2906 NEW: 1980
TABLE SIZE .................................. 11Inch X 24Inch
TABLE TRAVEL (LONGITUDINAL).................. 18Inch
TABLE TRAVEL (CROSS) ........................ 11Inch
SPINDLE HOUSING VERTICAL TRAVEL ............. 12- 5/8Inch
SPINDLE VERTICAL TRAVEL ..................... 3- 5/8Inch
TABLE TOP TO WHEEL COLLET ................... 2Inch X 18Inch
SPINDLE TO COLUMN WAYS ...................... 10Inch
SPINDLE TO COLUMN BELOW WAYS ................ 13-1/2Inch
INFINITELY VARIABLE SPINDLE SPEEDS ...... 25 TO 225 RPM
INFINITELY VARIABLE SPINDLE FEEDS ........ 2 TO 120 SPM
SPINDLE FEED ADJUSTABLE FROM ......... 0.100Inch TO 3- 5/8Inch
GRINDING WHEEL SPEEDS ............. 6,000 TO 175,000 RPM
GRINDING CAPACITY (HOLE DIA.) ........ 1/64Inch TO 3- 1/2Inch
WITH EXTENSION PLATE ...................... 13- 1/2Inch
MAIN SPINDLE SLIDE ADJUSTMENT .............. 1-1/2 DEG.
EITHER WAY, 3 DEG. INCLUDED ANGLE
RADIAL OFF-SET OF GRINDING SPINDLE:
(A) - FROM CENTER TO 1-1/8Inch OFF CENTER BY ROUGH ADJ.
(B) - WHILE RUNNING .0001Inch ADJ. FOR DISTANCE OF .100Inch
ANYWHERE IN THE 1-1/8Inch RANGE
APPROXIMATE WEIGHT .......................... 4,000 LBS
APPROX. FLOOR SPACE REQUIRED ..... 58InchLR X 59InchFB X 91InchH
MINIMUM HEIGHT WITH HEAD IN DOWN POSITION ......... 86Inch
MACHINE FEATURES:
ELECTRONIC SERVO DRIVE PROVIDES INFINITELY
VARIABLE SPINDLE SPEEDS (25 TO 225 RPM)
HARDENED, GROUND AND LAPPED STEEL WAYS (NO GIBS)
HARDENED, GROUND & LAPPED NITRALLOY LEAD SCREWS
LEADSCREWS & NUTS ARE FULLY IMMERSED & OPERATE IN A
BATH OF OIL.
1/5 H.P. D.C. MOTOR (MAIN SPINDLE)
EQUIPPED WITH:
MOORE JIG GRINDING HEADS ..... CHOICE OF 40K OR 60K RPM.
PRESENTLY, THE MACHINE HAS A 40K RPM HEAD.
MACHINE IS WIRED FOR 230 VOLTS/1 PHASE/60 CYCLE ELECTRICS
RISER BLOCK FOR INCREASED WORK HEIGHT & MATCHING
AUXILLARY TABLE RESTORES ORIGINAL TABLE-TO-SPINDLE
RELATIONSHIP.
** INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE **
** EXCEPTIONAL CONDITION - ORIGINAL PAINT!! **
|
|
|
NOTE: Displayed on page Moore G-18 11Inch Y Axis 18Inch X Axis Moore G-18 JIG GRINDER, FACTORY RISER BLOCK & MATCHIN is listed under ID# 14706 by Machinery Values Inc. in category Jig Grinders. For any additional info regarding this Moore G-18 please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
