| Cincinnati-Heald 273A
Listed For Sale at MachineKs.com in category - ID / Internal Grinders. |
|
|
| |
|
| 24.5Inch Swing 16Inch Stroke Cincinnati-Heald 273A ID GRINDER, REBUILT BY SERVICE | | Ad Id#: | 14815 | | Seller Ref.# | 145744 | | Model: | 273A | | Make: | Cincinnati-Heald | | Year: | 1971 ( Used ) | | Price: | $0.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
| | Description: |
#273A CINCINNATI MILACRON-HEALD InchPRECISIONInch
UNIVERSAL INTERNAL GRINDING MACHINE
** REBUILT & UPGRADED BY InchTHE SERVICE NETWORKInch
OF PRINCETON, MA IN 1997 **
http://www.sni-grinders.com
S/N: 44287 NEW: 1971
MAXIMUM SWING OVER TABLE EXTENSION,
WORKHEAD PARALLEL TO TABLE WITHOUT CHUCK
GUARD, PERMITS NO WORKSLIDE TRAVEL,
WITH LIMITED TABLE TRAVEL ..................... 24-1/2Inch
SWING WORKHEAD SWIVELED +/- 90 DEGREES ............. 13Inch
SWING INSIDE STANDARD CHUCK GUARD .................. 20Inch
ANGULAR ADJUSTMENT OF WORKHEAD .............. 90 DEGREES
WORKHEAD POSITIONING SLIDE TRAVEL .............. 17-1/2Inch
MAXIMUM TABLE TRAVEL ............................... 20Inch
MAXIMUM GRINDING STROKE ............................ 16Inch
WHEELHEAD CROSS SLIDE TRAVEL .................... 1-1/2Inch
CENTER OF WORKHEAD SPINDLE TO FLOOR ............ 43-1/2Inch
DISTANCE WORKHEAD FLANGE TO EDGE
WHEELSLIDE .............................. 0 TO 29-1/16Inch
TABLE SPEEDS FOR GRINDING ................. 0 TO 18 FPM
WOKRHEAD SPEEDS - REVERSIBLE & INFINITELY
VARIABLE BETWEEN ......................... 0 TO 500 RPM
RAPID TRAVERSE OF TABLE ........................ 18 FPM
ONE TURN OF CROSS FEED HANDWHEEL ........ 0.050Inch ON DIA.
CROSS FEED IN INCREMENTS, AT ONE OR
BOTH ENDS OF TABLE STROKE .... 0.0001Inch TO .0005Inch ON DIA.
MINIMUM STROKE .................................. 0.125Inch
ONE TURN OF WORKSLIDE HANDWHEEL ................. 0.100Inch
ONE TURN OF TABLE HANDWHEEL ..................... 3-3/4Inch
APPROXIMATE MACHINE WEIGHT .................. 6,200 LBS.
APPROXIMATE FLOOR SPACE (MACHINE ONLY) ....... 74Inch X 38Inch
EQUIPPED WITH:
HYDROSTATIC TABLE WAYS
FEED BOX COMBINES AUTOMATIC AND MANUAL CONTROL FOR
COARSE AND FINE FEEDS
GUARDING & CHUTE FOR COOLANT
5 H.P./3/60/230-460 VOLT WHEELHEAD MOTOR
FACING ATTACHMENT - INCLUDES 4-POSITION BARREL STOP
- (1) I.D. SPINDLE, AIR BEARINGS, 17,500 RPM MAXIMUM.
12Inch DIAMETER InchMICROCENTRICInch AIR-POWERED CHUCK WITH POWER
InchCLAMPInch & InchUNCLAMPInch PUSH BUTTONS
WORKHEAD POSITIONING STOP - LOCATES WORKHEAD CROSSSLIDE
FRONT-TO-REAR. INCLUDES 3-POSITION STOP WITH DIAL
INDICATOR.
SWING-DOWN WHEEL DRESSER
COOLANT TANK & PUMP
MOTORS ON THE MACHINE ARE 3/60/230-460 VOLTS
MACHINE IS PRESENTLY WIRED FOR 460 VOLTS
SPECIAL NOTE:
MACHINE WAS REBUILT & UPGRADED BY InchTHE SERVICE NETWORKInch
OF PRINCETON, MA. A NEW ALLEN BRADLEY MODEL #1305
ADJUSTABLE FREQUENCE AC DRIVE, SERIES InchCInch WAS INSTALLED,
WITH DIGITAL DISPLAY FOR THE WORKHEAD SPINDLE SPEED ON
THE MACHINE CONSOLE.
* HIGH PRECISION VERSATILE MACHINE FOR GRINDING STRAIGHT
OR TAPER BORES, STRAIGHT OR TAPER O.D.S AND FLAT,
CONVEX OR CONCAVE SURFACES. *
** INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE **
** ORIGINAL PAINT - EXCELLENT CONDITION & APPEARANCE * *
** REBUILT & UPGRADED BY InchTHE SERVICE NETWORKInch
OF PRINCETON, MA IN 1997 **
|
|
|
NOTE: Displayed on page Cincinnati-Heald 273A 24.5Inch Swing 16Inch Stroke Cincinnati-Heald 273A ID GRINDER, REBUILT BY SERVICE is listed under ID# 14815 by Machinery Values Inc. in category ID / Internal Grinders. For any additional info regarding this Cincinnati-Heald 273A please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
|