|
Jones & Shipman 1307-EIT
Listed For Sale at MachineKs.com in category - Universal Cylindrical Grinders. |
|
|
| |
|
| 14Inch Swing 40Inch Centers Jones & Shipman 1307-EIT OD GRINDER |
| Ad Id#: | 14860 | | Seller Ref.# | 145975 | | Model: | 1307-EIT | | Make: | Jones & Shipman | | Year: | 1982 ( Used ) | | Price: | $0.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|
| Description: |
14Inch X 40Inch JONES & SHIPMAN InchHIGH PRECISIONInch
UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER
MODEL: 1307-EIT S/N: BO-91497 NEW: 1982
MAXIMUM SWING ...................................... 14Inch
DISTANCE BETWEEN CENTERS ............................ 40Inch
TABLE SWIVEL ADJ., INCLUDED ANGLE CLOCKWISE ....... 12 DEG.
CCW ............. 16 DEG.
LONGITUDINAL TABLE SPEED (HYDRAULIC) ...... 3Inch TO 180Inch IPM
MANUAL TRAVERSE, HANDWHEEL PER REV. ................ 0.50Inch
FINE HAND TRAVERSE KNOB GRAD. .................... 0.0005Inch
WHEELHEAD:
CROSS FEED HANDWHEEL GRAD. ....................... 0.0002Inch
ONE DEPRESSION OF FINE FEED LEVER KNOB ........... 0.0001Inch
AUTO INFEED @ TABLE REVERSALS .......... 0.0001Inch TO .0006Inch
FEED @ REVERSAL OF TABLE,
REDUCTION IN DIAMETER .................. 0.0002Inch TO .0012Inch
PLUNGE FEED RATE, INF. VAR. FROM ....... 0.0001Inch TO .0006Inch
PLUNGE, REDUCTION IN DIA. FROM ........... 0.004Inch TO .160Inch
RANGE OF PLUNGE FEED IS ............ 0.8 REV. OF HANDWHEEL
CROSS TRAVERSE OF WHEELHEAD, EIT MODEL ................ 7Inch
TOP SLIDE ADJUSTMENT ............................. 4- 1/8Inch
WHEELHEAD, UPPER SWIVEL ADJUSTMENT ....... 180 DEG. L & R
WHEELHEAD, LOWER SWIVEL ADJUSTMENT ........... 90 DEG. CW
75 DEG. CCW
WHEEL SIZE ................................. 12Inch X 1Inch X 5Inch
WHEEL SPEEDS (2) ...................... 2,000 & 2,680 RPM
WHEELHEAD MOTOR .................................... 2 HP
MAX. WEIGHT OF PART HELD IN WORKHEAD ............ 608 LBS.
WORKHEAD SPINDLE SPEEDS (6) ................ 40 TO 320 RPM
WORKHEAD SPINDLE TAPER .............................. #3MT
APPROX. FLOOR SPACE REQUIRED FOR OPERATION .... 174Inch X 54Inch
APPROX. MACHINE WEIGHT ........................ 6,720 LBS
MACHINE FEATURES:
InchEIUInch SINGLE SWIVEL WHEELHEAD DESIGN
HYDRAULIC OPERATION FEATURING:
- POWER TABLE TRAVERSE
- AUTO INFEED
- PLUNGE INFEED OPTION
FINE FEED MECHANISM FOR INFEED
FINE FEED KNOB FOR TABLE TRAVERSE
DUAL LIVE/DEAD WORKHEAD SPINDLE
COOLANT SYSTEM
MACHINE IS WIRED PRESENTLY FOR 3/60/480 VOLT OPERATION
EQUIPPED WITH THE FOLLOWING ACCESSORIES:
SWING AROUND I.D. ATTACHMENT
I.D. GRINDING SPINDLE
6- 1/2Inch MAGNETIC CHUCK MADE BY InchECLIPSEInch WITH ADAPTOR
8Inch InchPRATT BURNEREDInch 4-JAW CHUCK WITH ADAPTOR
5Inch InchPRATT BURNEREDInch 3-JAW CHUCK WITH ADAPTOR
3-POINT STEADY REST, APPROXIMATELY 3- 1/4Inch CAPACITY
DRAW BAR FOR WORKHEAD ATTACHMENTS
** INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE **
** ORIGINAL PAINT - EXCELLENT CONDITION & APPEARANCE ** |
|
|
NOTE: Displayed on page Jones & Shipman 1307-EIT 14Inch Swing 40Inch Centers Jones & Shipman 1307-EIT OD GRINDER is listed under ID# 14860 by Machinery Values Inc. in category Universal Cylindrical Grinders. For any additional info regarding this Jones & Shipman 1307-EIT please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|