| Jones & Shipman 1300-EIT
Listed For Sale at MachineKs.com in category - Universal Cylindrical Grinders. |
|
|
| |
|
| 10Inch Swing 27Inch Centers Jones & Shipman 1300-EIT OD GRINDER, I.D., DOUBLE SWI | | Ad Id#: | 14861 | | Seller Ref.# | 145976 | | Model: | 1300-EIT | | Make: | Jones & Shipman | | Year: | 1980 ( Used ) | | Price: | $0.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
| | Description: |
10Inch X 27Inch JONES & SHIPMAN InchHIGH PRECISIONInch
UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER
MODEL: 1300-EIT S/N: BO-90144 NEW: 1980
MAXIMUM SWING ...................................... 10Inch
DISTANCE BETWEEN CENTERS ............................ 27Inch
TABLE SWIVEL ADJ., INCLUDED ANGLE CLOCKWISE ....... 12 DEG.
CCW ............. 20 DEG.
LONGITUDINAL TABLE SPEED (HYDRAULIC) ...... 3Inch TO 180Inch IPM
MANUAL TRAVERSE, HANDWHEEL PER REV. ................ 0.50Inch
FINE HAND TRAVERSE KNOB GRAD. .................... 0.0005Inch
WHEELHEAD:
CROSS FEED HANDWHEEL GRAD. ....................... 0.0002Inch
ONE DEPRESSION OF FINE FEED LEVER KNOB ........... 0.0001Inch
AUTO INFEED @ TABLE REVERSALS .......... 0.0001Inch TO .0006Inch
FEED @ REVERSAL OF TABLE,
REDUCTION IN DIAMETER .................. 0.0002Inch TO .0012Inch
PLUNGE FEED RATE, INF. VAR. FROM ....... 0.0001Inch TO .0006Inch
PLUNGE, REDUCTION IN DIA. FROM ........... 0.004Inch TO .160Inch
RANGE OF PLUNGE FEED IS ............ 0.8 REV. OF HANDWHEEL
CROSS TRAVERSE OF WHEELHEAD, EIT MODEL ................ 7Inch
TOP SLIDE ADJUSTMENT ............................. 4- 1/8Inch
WHEELHEAD, UPPER SWIVEL ADJUSTMENT ....... 180 DEG. L & R
WHEELHEAD, LOWER SWIVEL ADJUSTMENT ........... 90 DEG. CW
75 DEG. CCW
WHEEL SIZE ................................. 12Inch X 1Inch X 5Inch
WHEEL SPEEDS (2) ...................... 2,000 & 2,680 RPM
WHEELHEAD MOTOR .................................... 2 HP
MAX. WEIGHT OF PART HELD IN WORKHEAD ............ 608 LBS.
WORKHEAD SPINDLE SPEEDS (6) ................ 40 TO 320 RPM
WORKHEAD SPINDLE TAPER .............................. #3MT
APPROX. FLOOR SPACE REQUIRED FOR OPERATION .... 123Inch X 45Inch
APPROX. MACHINE WEIGHT ........................ 5,380 LBS
MACHINE FEATURES:
InchEIUInch SINGLE SWIVEL WHEELHEAD DESIGN
HYDRAULIC OPERATION FEATURING:
- POWER TABLE TRAVERSE
- AUTO INFEED
- PLUNGE INFEED OPTION
FINE FEED MECHANISM FOR INFEED
FINE FEED KNOB FOR TABLE TRAVERSE
DUAL LIVE/DEAD WORKHEAD SPINDLE
COOLANT SYSTEM
MACHINE IS WIRED PRESENTLY FOR 3/60/480 VOLT OPERATION
EQUIPPED WITH THE FOLLOWING ACCESSORIES:
SWING AROUND I.D. ATTACHMENT
I.D. GRINDING SPINDLE
8Inch InchPRATT BURNEREDInch 3-JAW CHUCK WITH ADAPTOR
5Inch InchPRATT BURNEREDInch 3-JAW CHUCK WITH ADAPTOR
DRAW BAR FOR WORKHEAD ATTACHMENTS
** INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE **
** EXCELLENT CONDITION & APPEARANCE ** |
|
|
NOTE: Displayed on page Jones & Shipman 1300-EIT 10Inch Swing 27Inch Centers Jones & Shipman 1300-EIT OD GRINDER, I.D., DOUBLE SWI is listed under ID# 14861 by Machinery Values Inc. in category Universal Cylindrical Grinders. For any additional info regarding this Jones & Shipman 1300-EIT please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
|