[ ← GO TO AD ]

Landis 1R

Listed For Sale at MachineKs.com in category - Universal Cylindrical Grinders.

[ TRANSLATOR ]

10Inch Swing 20Inch Centers Landis 1R OD GRINDER, I.D., HYD. TABLE, AUTO INFEED,

Ad Id#:	14863
Seller Ref.#	145981
Model:	1R
Make:	Landis
Year:	1984 ( Used )
Price:	$0.00
Location:	USA

Ad Status:

CLOSED

Listed By:

Machinery Values Inc.

Address:

401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501

Description:

10Inch X 20Inch LANDIS (MADE IN USA) InchHIGH-PRECISIONInch UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER MODEL: 1R S/N: T884-70 NEW: 1985 NOMINAL SWING OVER TABLE .......................... 10Inch MAXIMUM SWING OVER TABLE ...................... 10-7/8Inch NOMINAL DISTANCE BETWEEN CENTERS .................. 20Inch HYDRAULIC TABLE TRAVERSE ............... 2Inch TO 240Inch IPM TRAVERSE PER TURN OF HANDWHEEL ................. 0.200Inch TRAVERSE HANDWHEEL GRADUATIONS ................. 0.001Inch SWIVEL TABLE GRADUATED ........ 20 DEGREES, 4Inch PER FOOT WHEELHEAD: WHEELHEAD SWIVELS LEFT & RIGHT OF CENTER ...... 90 DEG. WHEEL SIZE .............................. 12Inch DIAMETER MAXIMUM WIDTH, FULL WHEEL ......................... 3Inch MAXIMUM HYDRAULIC INFEED - ON DIAMETER ........ 0.090Inch RAPID INFEED STROKE ............................... 1Inch MINIMUM FEED GRADUATIONS - ON DIAMETER ..... 0.000050Inch WORK DIAMETER REDUCTION PER REVOLUTION OF HANDWHEEL ..................................... 0.100Inch WORK DIAMETER REDUCTION PER REVOLUTION OF FINE FEED KNOB ............................... 0.001Inch WHEELHEAD MOTOR ................................ 5 HP WORKHEAD: WORKHEAD SWIVELS TOWARD WHEELHEAD ........ 90 DEGREES WORKHEAD SWIVELS AWAY FROM WHEELHEAD ..... 30 DEGREES WORKHEAD SPINDLE SPEEDS (6) ........... 60 TO 600 RPM WORKHEAD SPINDLE NOSE ......................... A2-5Inch WORKHEAD MOTOR ............................... 1/4 HP APPROXIMATE WEIGHT .......................... 4,150 LBS APPROXIMATE DIMENSIONS ............. 8L X 4W X 66InchHT EQUIPPED WITH: SWING DOWN INTERNAL GRINDING ATTACHMENT WITH I.D. SPINDLE UNIVERSAL WHEELHEAD AND UNIVERSAL WORKHEAD 12Inch x 3InchWIDTH x 5InchBORE GRINDING WHEEL HYDRAULIC TABLE TRAVERSE AUTO INFEED @ TABLE REVERSALS AUTO PLUNGE FEED POWER RAPID WHEELHEAD ADVANCE & RETRACTION SPARKOUT TIMER DUAL LIVE/DEAD SPINDLE HEADSTOCK HARD FILM MICROSHERE WHEEL SPINDLE BEARINGS COOLANT SYSTEM CARRIAGE AND WHEELHEAD WAYS ARE AUTOMATICALLY LUBRICATED MACHINE MOTORS ARE WIRED FOR 3/60/220-440 VOLT OPERATION * * EXCELLENT CONDITION & APPEARANCE * * INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE

NOTE: Displayed on page Landis 1R 10Inch Swing 20Inch Centers Landis 1R OD GRINDER, I.D., HYD. TABLE, AUTO INFEED, is listed under ID# 14863 by Machinery Values Inc. in category Universal Cylindrical Grinders. For any additional info regarding this Landis 1R please contact directly Machinery Values Inc..