|
Barcorp HGL
Listed For Sale at MachineKs.com in category - Power Squaring Shears (Inches). |
|
|
| |
|
| 0.25Inch Cap. 102Inch Width Barcorp HGL SHEAR, Front Operated Power Back Gauge |
| Ad Id#: | 15078 | | Seller Ref.# | 146590 | | Model: | HGL | | Make: | Barcorp | | Year: | 2000 ( Used ) | | Price: | $12,500.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|
| Description: |
BARCORP 86Inch X 1/4Inch HYDRAULIC POWER SQ. SHEAR
MODEL HGL S/N 4485 NEW 2000
BLADE LENGTH .................................... 86Inch
CUTTING CAP. (MILD STEEL) ....................... 1/4Inch
CUTTING CAP. (STAINLESS) ........................ 5/32Inch
NUMBER OF HOLDDOWNS ............................. 14
BACK GAUGE RANGE ................................ 30Inch
RAKE ANGLE ...................................... 1.6 DEG.
MOTOR HP ........................................ 17
MACHINE WEIGHT: 9,000 LBS.
DIMENSIONS: 10 L x 7 W x 5 H
STANDARD EQUIPMENT:
PROGRAMMABLE NC Backgauge, Inch/Metric switchable, can be programmed
with the size and quantity of cuts of up to 10 different parts. Each part size in
memory has an associated count-down cut counter that is programmed to a
maximum of 99 cuts per size. The control counts down to zero from the pre-set
quantity and then automatically positions the gauge bar to the next part size. In
this way, the control cycles through each of the 10 part sizes allowing for a
maximum of 10 parts x 99 cuts/part or 990 parts to be programmed. The control
can be set to automatically repeat the program at its end. Display resolution is
0.001 inch / 0.01mm.
Backgauge bar lifts up automatically at the end of its travel allowing the entry of
plates into the shear which are longer than the backgauge bar travel.
Rexroth hydraulic components. Square D or Telemecanique Electrics to CSA or
UL: 230, 460 or 600/60/3 or to required voltage with low volt control
HCHC top and bottom blades:
Top blade - two edged
Bottom blade - four edged
Stroke counter
Independent hydraulic holddowns
Rapid blade gap adjustment
Infinitely adjustable cutting length
Ball transfers on table
Shadowlight
Foot pedal control for both single or continuous stroking
Inching control via push buttons
Side squaring arm with scale to 40Inch and stop
Two front support arms - 36Inch
Removable filler plates in table
Protective front guarding
Oil tank level indicator
|
|
|
NOTE: Displayed on page Barcorp HGL 0.25Inch Cap. 102Inch Width Barcorp HGL SHEAR, Front Operated Power Back Gauge is listed under ID# 15078 by Machinery Values Inc. in category Power Squaring Shears (Inches). For any additional info regarding this Barcorp HGL please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|