| DURMA DELEM CNC
Listed For Sale at MachineKs.com in category - Press Brakes with CNC Back Gauges. |
|
|
| |
|
| 440 Ton x 20 Durma Model: AD-S 60400 Press Brake, Mfg:2006 | | Ad Id#: | 16514 | | Seller Ref.# | 9671 | | Model: | DELEM CNC | | Make: | DURMA | | Year: | 2006 ( Used ) | | Price: | On Request | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Jordan Craig Machinery | | Address: |
151 North Main Street Suite 203
10956 New City NY
USA
Phone: 845-398-0073
Fax: 845-398-0074
| |
|  | | Description: |
440 Ton x 20 Durma Model: AD-S 60400 Press Brake w/Delem Multi-axis CNC Back Gauge Mfg: 2006
We have European tooling and holders. 1/8 punch goose neck. 1/8 punch. 3/8
punch. 3/4 punch. All punches are 2 long = 20.
4-way v die. 1, 2.5, 4 and 6.
Specifications:
Tons: 440
Bed Length: 238
Between Columns: 200
Y Rapid Speed: 236 IPM
Y Working Speed: 19 IPM
Y Return Speed: 189 IPM
Open Height (bed to ram): 25
Table Width: 12
Table Height: 48
Stroke: 14.4
Throat Depth: 20
X Axis Speed: 827 IPM
X Axis Travel:30 IPM
R Axis Speed: 12 inches/second
R Axis Travel:10 inches/second
Main Motor: 50 HP
Oil Capacity: 132 gallon
Dimensions: 27.7 L x 19 W x 12.4 H
Weight: 90,390 Lbs.
Standard Equipment
-Large Stroke-Daylight-Throat
-Y1,Y2 Ram Positioning
-Delem DA 66 Graphic Control
-Euro/American Style Punch Clamp
-X/R Back Gauge
-Quickset Sliding Front Sheet Support
-Automatic Table Crowning
-Rear Work Light
-Side and Rear Safety Doors
LOWER DEFLECTION & LONGER LIFETIME
Durmas high engineering standards minimize stress and deflection.
All mainframe components ( side frames, ram, bed) are designed with built in
safety factors.
All Durma machines are constructed from st44-2 steel.
Acceptable industry stress standards for material is 8,5 kg/mm2 stress.
All Durma machines must meet a value of 5-6 kg/mm2 .
These strict standards reduce deflection and increase frame durability
and the ability to hold tolerances over long periods of heavy use.
All incoming plate must be certified the Durmas standards and requirements.
Durmas high frame rigidity and robustness provides long-term accurate
bending.
Y1, Y2 PRECISION & FLEXIBILITY
In the ADS Series Y1, Y2 ram positioning system each
cylinder operates independently in a closed loop system.
Linear encoders combined with precision hydraulic valves
and the CNC command center, provide .0004 accuracy
and the ability to program all ram position, speeds and ram
tilt.
Application advantages include:
-Stage or Progressive Bending
-Fade Out or Conical Work
-Enhanced Material Handling with Total Ram Control
OVERSIZED RAM GUIDES
Long rectangular shaped guides assure stable, smooth,
and secure ram positioning. Conventional machines can
typical have these guides mounted on the inside of the
frames resulting in obstructions to full length acute angle
bends.
X/R STYLE BACK GAUGE
With the X/R style back gauge, the height of the back
gauge is programmable in addition to the depth. This is
very useful for changes in die height, extreme crowning
settings, and for gauging to a flange that may be a different
height than the die. |
|
|
NOTE: Displayed on page DURMA DELEM CNC 440 Ton x 20 Durma Model: AD-S 60400 Press Brake, Mfg:2006 is listed under ID# 16514 by Jordan Craig Machinery in category Press Brakes with CNC Back Gauges. For any additional info regarding this DURMA DELEM CNC please contact directly Jordan Craig Machinery.
|
© MACHINEKS.COM All Rights Reserved
|
|
