|
SERMAS INDUSTRIE ALLEN BRADLEY CNC
Listed For Sale at MachineKs.com in category - Circular Cold Saws. |
|
|
| |
|
| SERMAS INDUSTRIE |
| Ad Id#: | 16592 | | Seller Ref.# | 9712 | | Model: | ALLEN BRADLEY CNC | | Make: | SERMAS INDUSTRIE | | Year: | 1995 ( Used ) | | Price: | On Request | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Jordan Craig Machinery | | Address: |
151 North Main Street Suite 203
10956 New City NY
USA
Phone: 845-398-0073
Fax: 845-398-0074
| |
|
| Description: |
REMANUFACTURED IN 2012 WITH ALLEN BRADLEY CONTROLS AND STEEL CUTTING
MODIFICATIONS.
CAPACITIES/SPECIFICATIONS:
MATERIAL CUT THICKNESS MAXIMUM: 32.25" (820MM)
THROAT CAPACITY: 78" (2000MM)
MAXIMUM CUT TRAVEL: 15' (4.6M)
ELEVATED CUTTING DECK SIZE: 15' X 23' X 65"h (4.6M X 7M X 1650MMh)
TABLE cAPACITY: 40,000 POUNDS. (PROPER FOUNDATION REQUIRED FOR MAXIMUM LOAD
CONDITIONS.)
BLADE SIZE: 2-5/8 X 37' (BIMETAL OR CARBIDE-TIPPED WITH CIRCULATING COOLANT)
BLADE SPEED RANGE: 5-600FPM (183M/MIN)
WHEEL SPECIFICATIONS: THREE INTERCHANGEABLE WITH ONE SPARE. 3" WIDE X 30"
DIAMETER.
cONTROLLED PROGRAMMABLE CUTTING FEED RATES: .020"/MIN TO 500"/MIN (.5MM-
13000MM/MIN
ACCESSORIES AND ANCILLARY SUPPORT FEATURES:
BLADE TENSIONING WITH PUSHBUTTON CONTROLS.
TORIT DUST COLLECTOR BUILT IN.
THE ENTIRE CUTTING FRAME MOVES ON LINEAR BEARINGS WITH A RACK AND PINION DRIVE
WITH POSITION AND SPEED FEEDBACK.
HYDRAULIC LIFT AND POWERED FEED ROLL SYSTEM.
LASER CUT INDICATING LINE. (EXTREMELY ACCURATE)
HYDRAULIC PUSHBUTTON BLADE TENSIONING.
INTEGRATED EFFECTIVE WORK HOLDING CLAMP SYSTEM.
POWERED BACKSTOP WITH DIGITAL MEASUREMENT READOUT.
ALLEN BRADLEY PLC CONTROLS WITH TOUCH SCREEN.
COMPLETE MAINTENANCE MANUALS
480v 3PH INPUT POWER. FROM THE FACTORY REQUIRED 60a SERVICE. AS CONFIGURED
REQUIRES 30A SERVICE DISCONNECT.
MACHINE SHIP WEIGHT: ESTIMATED AT 55,000 POUNDS.
NOTES:
THIS MACHINE BEGAN ITS LIFE BRAND NEW IN 1996 AND WAS DESIGNED AND USED TO CUT
VERY THICK SLABS OF ALUMINUM AT HIGH SPEED. THE SAW UTILIZED A 40HP DRIVE
MOTOR FOR THAT PURPOSE WITH A BLADE SPEED OF 8000FPM.
IN 2012 THE SAW WENT THROUGH A $93,000 RETROFIT TO FACILITATE THE CUTTING OF
HEAT TREATED ALLOY STEEL AS WELL AS EXOTIC MATERIALS. THE UPGRADE ADDED OR
MODIFIED THE FOLLOWING MACHINE FEATURES:
1.THE ORIGINAL FACTORY, 40 hp DRIVE MOTOR REMAINS COUPLED BUT DISCONNECTED
ELECTRICALLY, AND THE DRIVE BLADE WHEEL IS NOW DRIVEN BY A 7.5hp, 40:1 GEAR-
MOTOR PROVIDING A VERY USEABLE BLADE SPEED RANGE OF 0-600FPM. SPEED CONTROL IS
WITH AN AC INVERTER CONTROLLED FROM THE TOUCH SCREEN.
2.THE BLADE GUIDE SYSTEM (NEAR THE WORK CUT) WAS COMPLETELY ENGINEERED AND
REMANUFACTURED TO ACCEPT hYD-mECH BRAND 2-5/8" CARBIDE REPLACEABLE BLADE
GUIDES. tHE UPPER BLADE GUIDE USES A PRECISION MACHINED RACK AND PINION
ADJUSTMENT TO ALLOW THE UPPER GUIDE TO BE QUICKLY ADJUSTED TO THE WORK PIECE
HEIGHT, DOWN TO 2".
3.A CIRCULATING BLADE COOLANT SYSTEM WITH RESERVOIR AND SCREEN IS INTEGRATED.
4.THE ORIGINAL sIEMENS plc WAS REPLACED WITH A NEW ALLEN BRADLEY PLC AND
ANALOG INPUT/OUTPUT. A TOUCH SCREEN hmi IS INTEGRATED ON THE CONTROL PANEL FOR
EASY ACCESS TO ALL CONTROL FUNCTIONS INCLUDING BLADE SPEED AND CUTTING SPEED.
MOTOR LOAD AND DIAGNOSTIC FUNCTIONS ARE ALSO DISPLAYED. pRECISE CUT DISTANCE
CAN BE PROGRAMMED. ALL WIRING DIAGRAMS AND PLC PROGRAMMING CODE ARE
DOCUMENTED AND PROVIDED.
5.SHIPPING REQUIREMENTS: TWO NON-PERMIT OPEN FLAT SEMI TRAILERS WITH AIR RIDE
SUSPENSION.
|
|
|
NOTE: Displayed on page SERMAS INDUSTRIE ALLEN BRADLEY CNC SERMAS INDUSTRIE is listed under ID# 16592 by Jordan Craig Machinery in category Circular Cold Saws. For any additional info regarding this SERMAS INDUSTRIE ALLEN BRADLEY CNC please contact directly Jordan Craig Machinery.
|
© MACHINEKS.COM All Rights Reserved
|