| Romi M-20
Listed For Sale at MachineKs.com in category - CNC Lathes, Flat Bed. |
|
|
| |
|
| 20 Swing 60 Centers Romi M-20 CNC LATHE, Ge Fanuc 21it Control, 3-Jaw,Pro | | Ad Id#: | 16875 | | Seller Ref.# | 151218 | | Model: | M-20 | | Make: | Romi | | Year: | 2006 ( Used ) | | Price: | $0.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|  | | Description: |
| ROMI CNC/MANUAL FLAT BED LATHEMODEL M-20/60, S/N: 002-091788-404, NEW: 2006 SPECIFICATIONSDISTANCE BETWEEN CENTERS..................... 62.8"SWING OVER BED............................... 20" SWING OVER CROSS SLIDE....................... 10"SWING OVER CARRIAGE WINGS.................... 17.7"CROSS SLIDE TRAVEL (X-AXIS).................. 11.02"LONGITUDINAL TRAVEL (Z-AXIS)................. 61.6"BED WIDTH.................................... 13.39" HOLE THROUGH SPINDLE......................... 3.15" RANGE OF SPINDLE SPEEDS (INF VARIABLE)....... 2 - 2,200 RPM RAPID TRAVERSE (Z)........................... 394 IPM RAPID TRAVERSE (X)........................... 295 IPM TAILSOCK QUILL TRAVEL........................ 5.12" QUILL DIAMETER............................... 3.15" QUILL TAPER HOLE............................. 4MT MAIN MOTOR................................... 15 HP APPROXIMATE WEIGHT........................... 8,000 LBS APPROXIMATE FLOOR SPACE ..................... 144"L x 65"W VOLTAGE... 230/3/60, FULL LOAD CURRENT 51 A EQUIPPED WITH: - GE-FANUC 21iT-B CONTROL w/MANAUL GUIDANCE SOFTWARE, TOOL PATH & 3D PART SHAPE GRAPHICS, TEACH MODE, CONVERSATIONAL PROGRAMMING, G CODE PROGRAMMING, BUILT-IN DRO- 15 HP GE-FANUC "P" TYPE VARIABLE SPEED SPINDLE DRIVE- TURN PARTS MANUALLY OR AUTOMATICALLY- DUAL ELECTRONIC HANDWHEEL CONTROLS- "TEACH" 1ST PART, RUN REMAINING PARTS AUTOMATICALLY- FLASH MEMORY CARD SLOT & RS 232 PORT- 10.4" COLOR LCD DISPLAY- RIGID TAPPING- CONSTANT SURFACE SPEED- INCH/METRIC CONVERSION- MULTI-START THREADING, THREAD REPAIR- DUPLOMATIC 8-STATION AUTOMATIC TURRET WITH MISC. TOOL BLOCKS- 15" 3-JAW CHUCK- COOLANT SYSTEM- AUTOMATIC LUBRICATION SYSTEM LOW HOUR MACHINE, LESS THAN 3,000 RUNNING HOURS |
|
|
NOTE: Displayed on page Romi M-20 20 Swing 60 Centers Romi M-20 CNC LATHE, Ge Fanuc 21it Control, 3-Jaw,Pro is listed under ID# 16875 by Machinery Values Inc. in category CNC Lathes, Flat Bed. For any additional info regarding this Romi M-20 please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
|
