| 4500 WATT MITSUBISHI 3015LVP
Listed For Sale at MachineKs.com in category - Other Metalworking Machinery. |
|
|
| |
|
| 4500 WATT MITSUBISHI 3015LVP (PLUS II)-45 CF-R, PRECISION RACK AND | | Ad Id#: | 16993 | | Seller Ref.# | 9815 | | Model: | 3015LVP | | Make: | 4500 WATT MITSUBISHI | | Year: | 2011 ( Used ) | | Price: | On Request | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Jordan Craig Machinery | | Address: |
151 North Main Street Suite 203
10956 New City NY
USA
Phone: 845-398-0073
Fax: 845-398-0074
| |
|  | | Description: |
4500 WATT MITSUBISHI 3015LVP (PLUS II)-45 CF-R, PRECISION RACK AND
PINION, DIRECT DRIVE LASER
MFG:2011 - TOTAL HOURS: 11,400 - CUT HOURS: 3,944
Machine structure: Precision rack and pinion, direct drive
Travel drive method: X,Y, Z simultaneous 3 axes
Control method: X,Y, Z simultaneous 3 axis control
X-Axis stoke: 122.05"
Y-Axis stroke: 61.02"
Z-Axis Stroke: 3.54"
Maximum work piece size: 120.08" x 60.04"
Maximum processing feed rate: 1180 inches per minute
Maximum workpiece weight: 2050 lbs.
Table pass height: 33.5"
Rapid travel speed
Single axis: 3345 inches per minute
Simultaneous: 4730 inches per minute
Minimum command input: 0.001mm/.0001"
Drive motor type: intelligent AC servo
Machine unit dimensions: 418.5" L x 90.6" H x 183" W
Total system weight: 26,325 lbs.
Pallet change time: Approximately 25 seconds
Pallet changer weight: 4500 lbs.
Pallet changer drive mechanism: chain
Installation dimensions: 473.4" x 227.7"
Floor space requirement: 750 sq. ft.
Electrical requirements: 208 VAC ± 5%, 3 phase, 60 Hz
Motion system, CNC control: 71 KVA (Total machine usage)
Laser resonator: 202 (Full load Amps)
CNC controller specifications
Model: Mitsubishi LC20BP2
Type: Self contained-simple dust proof design (mounted on processing machine)
CPU: 64 Bit
Display unit: 10.4" TFT color LCD touch screen
Hard disc drive capacity: 2.0 GB
Program memory capacity, standard: 5000m/approximately 2 MB with 400 register
able programs
CO2 laser control
Power control: Output power, frequency duty
Operation control: Shutter open/close, beam on/off. Laser gas change, etc.
Processing machine control
Drive method: X,Y, Z (Simultaneous control)
Position detection: encoder
Minimum command unit: .001mm/.0001"
Program input method: 3.5" floppy, computer link, Ethernet LAN
Operation method: Memory operation, HD direct drive
Laser resonator specifications
Model: Mitsubishi 45CF-R
Excitation method: 3-axis cross flow, SD
Control method: power feedback
Power stability: ± 1 %
Beam mode: Low-order (main component TEM01)
Beam outer diameter: 1.02"
Beam divergence: Approximately 3.5" or less (total angle)
Wave length: 10.6 microns
Frequency setting range: 10~3000 Hz
Duty range: 0~100 % adjustable
Output power adjustable range: 0~100% of rating
Resonator unit dimensions: 98.4" long x 71.3" High x 31.5" wide
Resonator unit weight: 4850 lbs
Rated output power (CW): 4500 watts
Composition (CO2:CO:N2:He): 8:4:60:28
Consumption amount: 3 liters per hour
Gas sealing time: 24 hours during continuous oscillation
|
|
|
NOTE: Displayed on page 4500 WATT MITSUBISHI 3015LVP 4500 WATT MITSUBISHI 3015LVP (PLUS II)-45 CF-R, PRECISION RACK AND is listed under ID# 16993 by Jordan Craig Machinery in category Other Metalworking Machinery. For any additional info regarding this 4500 WATT MITSUBISHI 3015LVP please contact directly Jordan Craig Machinery.
|
© MACHINEKS.COM All Rights Reserved
|
|
