|
Landis 1R
Listed For Sale at MachineKs.com in category - Universal Cylindrical Grinders. |
|
|
| |
|
| 10 Swing 20 Centers Landis 1R OD GRINDER, SWING DOWN I.D., HYD. TABLE, AU |
| Ad Id#: | 17031 | | Seller Ref.# | 151460 | | Model: | 1R | | Make: | Landis | | Year: | 1981 ( Used ) | | Price: | $0.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|
 |
| Description: |
10" X 20" LANDIS (MADE IN USA) "HIGH-PRECISION"
UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER
MODEL: 1R S/N: 877-98 NEW: 1981
NOMINAL SWING OVER TABLE .......................... 10"
MAXIMUM SWING OVER TABLE ...................... 10-7/8"
NOMINAL DISTANCE BETWEEN CENTERS .................. 20"
HYDRAULIC TABLE TRAVERSE ............... 2" TO 240" IPM
TRAVERSE PER TURN OF HANDWHEEL ................. 0.200"
TRAVERSE HANDWHEEL GRADUATIONS ................. 0.001"
SWIVEL TABLE GRADUATED ........ 20 DEGREES, 4" PER FOOT
WHEELHEAD:
WHEELHEAD SWIVELS LEFT & RIGHT OF CENTER ...... 90 DEG.
WHEEL SIZE .............................. 12" DIAMETER
MAXIMUM WIDTH, FULL WHEEL ......................... 3"
MAXIMUM HYDRAULIC INFEED - ON DIAMETER ........ 0.090"
RAPID INFEED STROKE ............................... 1"
MINIMUM FEED GRADUATIONS - ON DIAMETER ..... 0.000050"
WORK DIAMETER REDUCTION PER REVOLUTION OF
HANDWHEEL ..................................... 0.100"
WORK DIAMETER REDUCTION PER REVOLUTION OF
FINE FEED KNOB ............................... 0.001"
WHEELHEAD MOTOR ................................ 5 HP
WORKHEAD:
WORKHEAD SWIVELS TOWARD WHEELHEAD ........ 90 DEGREES
WORKHEAD SWIVELS AWAY FROM WHEELHEAD ..... 30 DEGREES
WORKHEAD SPINDLE SPEEDS (6) ........... 60 TO 600 RPM
WORKHEAD SPINDLE NOSE ......................... A2-5"
WORKHEAD MOTOR ............................... 1/4 HP
APPROXIMATE WEIGHT .......................... 4,150 LBS
APPROXIMATE DIMENSIONS ............. 8L X 4W X 66"HT
EQUIPPED WITH:
SWING DOWN I.D. GRINDING ATTACHMENT WITH SPINDLE
UNIVERSAL WHEELHEAD AND UNIVERSAL WORKHEAD
HYDRAULIC TABLE TRAVERSE
AUTO INFEED @ TABLE REVERSALS
AUTO PLUNGE FEED
POWER RAPID WHEELHEAD ADVANCE & RETRACTION
SPARKOUT TIMER
DUAL LIVE/DEAD SPINDLE HEADSTOCK
HARD FILM MICROSHERE WHEEL SPINDLE BEARINGS
EXTERNAL COOLANT SYSTEM WITH TANK & PUMP
TABLE MOUNTED DRESSER
TWO-POINT STEADY REST
FACE PLATE
5C COLLET CHUCK MOUNTED ON WORKHEAD
CARRIAGE AND WHEELHEAD WAYS ARE AUTOMATICALLY LUBRICATED
MACHINE MOTORS ARE 3/60/230-460 VOLT
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **
** EXCEPTIONAL CONDITION & APPEARANCE - JUST BEAUTIFUL ** |
|
|
NOTE: Displayed on page Landis 1R 10 Swing 20 Centers Landis 1R OD GRINDER, SWING DOWN I.D., HYD. TABLE, AU is listed under ID# 17031 by Machinery Values Inc. in category Universal Cylindrical Grinders. For any additional info regarding this Landis 1R please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
