[ ← GO TO AD ]

Morrison 3

Listed For Sale at MachineKs.com in category - Apron Brakes.

[ TRANSLATOR ]

3 Width 14 Stroke Morrison 3 KEYSEATER, Brand New, 20 HP, Hydraulic

Ad Id#:	17845
Seller Ref.#	146454
Model:	3
Make:	Morrison
Year:	( New )
Price:	$89,000.00
Location:	USA

Listed By:

Machinery Values Inc.

Address:

401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501

Description:

Brand New D.C. Morrison 3 Keyseater - IN STOCK!!! The newly redesigned Morrison 3 Keyseater has been physically modified and is more rigid than ever! The back support bracket is twice the length of the older models, enabling more accurate keyways in various material. The overhead support is now easily raised and lowered by hydraulics with the push of a button. The programming is now extremely user friendly with the use of a programmable logic controller and human machine interface. (HMI) As in the past,the Morrison Keyseater does not require to be positoned in a pit, and needs no bushings to center the keyways. Cuts from 18 to 3 wide and 14 high. AUTOMATIC FEED: (.001through.006) eliminates pushing a feed bar, eliminates the human error of feeding too much or too little. The automatic feed insures accuracy and enables the operator to get ready for the nextset-up. Automatic Stop: automatically cuts off the feed for any given depth and this also frees the operator for other duties. Automatic Relief: backs the work away from the cutter on the up stroke eliminating drag and insuring a clean keyseat. Quick Set-Up: is one of the most important features. The operator has all control handles built into the machine and to change from one piece to another is very simple, and requires the least amount of time. Also different cutter bits are interchangeable. The cutter bar does not need to be changed in order to cut different size keyseats. Single Tooth Cutters: are not only for accuracy but eliminate time and trouble in sharpening. All cutters are of the finest HighSpeed Tool Steel. Adjustable Stroke: The stroke is infinitely adjustable. This is very desirable when slower cutting speeds are required. Automatic Centering: centers up the work quickly and easily. lt can be set for multiple jobs of two or more pieces, automatically centering the next work piece. Automatic Lubrication: feeds oil to all necessary moving parts by the means of a one shot system convenient for the operator. Uses No Bushings: and this feature not only simplifies the operation but no extra equipment needs to be ordered to cut a keyseating any size bore . The cutter bar is supported close to the actual cut by a quick acting adjustable cutter bar support, both above and below the work. Hydraulic System: with the hydraulic set on maximum pressure cylinder size is 3-1/4 diameter. The machine will develop approximately 8 tons of cutting pressure at cutting edge of cutter. SPECIFICATIONS: Cut Keyways: 1-1/8 - 3 Maximum length of cut: 14 Number of feeds (6): .001 thru .006 Distance from 2 cutter to column: 34-1/2 Table Size: 50 x 36-1/2 Table Height from floor: 41-1/2 Floor space hydraulic system: 41 x 43 Floor space keyseater: 84 x 36 Motor: 20hp 220 / 440 volt STANDARD: Start, Stop, magnetic starter with over and under voltage protection, variable speeds, automatic luberication, automatic table feed, hydraulic unit, centering vee and 2 cutter bar. *** CALL FOR PRICING FOR ADDITIONAL CUTTERS AND CUTTER BAR ADAPTOR (for small cuts).

NOTE: Displayed on page Morrison 3 3 Width 14 Stroke Morrison 3 KEYSEATER, Brand New, 20 HP, Hydraulic is listed under ID# 17845 by Machinery Values Inc. in category Apron Brakes. For any additional info regarding this Morrison 3 please contact directly Machinery Values Inc..