|
Metal Muncher MM-70
Listed For Sale at MachineKs.com in category - Ironworkers. |
|
|
| |
|
| 70 Ton 9 Throat Metal Muncher MM-70 IRONWORKER, w/Channel Shear Attachment |
| Ad Id#: | 18233 | | Seller Ref.# | 148912 | | Model: | MM-70 | | Make: | Metal Muncher | | Year: | 1995 ( Used ) | | Price: | $13,500.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|
 |
| Description: |
70 Ton Metal Muncher Hydraulic Ironworker
Model MM-70 S/N 03313295 New 1995
Throat depth - 9"
Open height - 14"
Stroke length - 7"
Ram shaft diameter - 3"
Strokes per minute - 40 @1/2
Platen size (depth x width) - 11" x 48"
Work station height (approximate) - 30"
Punch tonnage - 70 ton
Maximum material - 1" diameter thru 7/8" thick
Maximum hole (with special tooling)
- 4-1/2" diameter thru 3/16" thick
Plate shear blade length - 17-1/2"
Plate shear capactiy - 1" x 7", 3/4" x 12",
Angle shear capacity - 4" x 4" x 3/8"
Bar shear capacity: rounds - 1/4" to 1-3/8"
squares - 1/4" to 1-1/4"
Coper/Notcher capacity - 3" x 3" x 3/8"
Equipped with:
- Dual hydraulic cylinders allowing for independent
and simultaneous operation at each end of machine
- Remote electric foot pedal for actuation of press
cylinder
- Channel shear
- 11" x 48" Bed area on punch end
- 16" x 36" Press production table
- Coper/Notcher station with 18" x 18" material
support table
- Large Assortment of punches and dies
- 7 |
|
|
NOTE: Displayed on page Metal Muncher MM-70 70 Ton 9 Throat Metal Muncher MM-70 IRONWORKER, w/Channel Shear Attachment is listed under ID# 18233 by Machinery Values Inc. in category Ironworkers. For any additional info regarding this Metal Muncher MM-70 please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
