|
Okuma CADET-LNC-8
Listed For Sale at MachineKs.com in category - CNC Turning Centers - CNC Lathes. |
|
|
| |
|
| Okuma CADET-LNC-8 CNC LATHE, OSP 5020L, 8chk., Tailstck., Chip Conv. |
| Ad Id#: | 18429 | | Seller Ref.# | 149898 | | Model: | CADET-LNC-8 | | Make: | Okuma | | Year: | ( Used ) | | Price: | $0.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|
 |
| Description: |
OKUMA 2-AXIS CNC TURNING CENTER
MODEL: LNC-8 NEW: 1993
SWING OVER BED ......................... 15.75
MAXIMUM TURNING DIAMETER ............... 9.84
MAXIMUM WORK LENGTH .................... 15
SPINDLE SPEEDS RANGE ................... 75 TO 4,200 RPM
SPINDLE MOTOR .......................... 10 HP
SPINDLE BORE ........................... 2.2
DRAWTUBE ID ............................ 1.77
SPINDLE NOSE ........................... ASA A2-6
TURRET ................................. 12 POSITIONS
X-AXIS TRAVEL (CROSS SLIDE) ............ 6.89
Z-AXIS TRAVEL (LONGITUDINAL) ........... 20.47
CUTTING FEED RATE (BOTH AXES) .......... 0.0001 TO 40 IPR
RAPID TRAVERSE RATE .................... 472 IPM
TAILSTOCK QUILL DIA. ................... 3.54
TAILSTOCK TAPER ........................ MT#5
TAILSTOCK QUILL STROKE ................. 4.72
FLOOR SPACE REQUIRED ................... 73 X 108
MACHINE WEIGHT ......................... 9,670 LBS
EQUIPPED WITH:
- OKUMA OSP 5020L CNC CONTROL
- 8 3-JAW HYD. CHUCK
- 12 POSITION TURRET
- TAILSTOCK
- ALL AVAILABLE MANUALS
- ALL AVAILABLE TOOLHOLDERS
|
|
|
NOTE: Displayed on page Okuma CADET-LNC-8 Okuma CADET-LNC-8 CNC LATHE, OSP 5020L, 8chk., Tailstck., Chip Conv. is listed under ID# 18429 by Machinery Values Inc. in category CNC Turning Centers - CNC Lathes. For any additional info regarding this Okuma CADET-LNC-8 please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
