| Victor 2060 DCL
Listed For Sale at MachineKs.com in category - CNC Lathes, Flat Bed. |
|
|
| |
|
| 20 Swing 60 Centers Victor 2060 DCL CNC LATHE, Fanuc 20 T Control, Handwh | | Ad Id#: | 19394 | | Seller Ref.# | 153168 | | Model: | 2060 DCL | | Make: | Victor | | Year: | 2000 ( Used ) | | Price: | $24,500.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|  | | Description: |
20" X 60" VICTOR CNC TEACH LATHE
W/FANUC 20-T CONTROL
MODEL: 2060 DCL, S/N: YD2061032, NEW: 2000
SPECIFICATIONS:
SWING OVER BED......................... 19.7"
DISTANCE BETWEEN CENTERS............... 60"
SWING OVER CROSS SLIDE................. 11.4"
WIDTH OF BED .......................... 13.5"
SPINDLE NOSE........................... CAMLOCK D1-8"
HOLE THRU THE SPINDLE ................. 3"
SPINDLE SPEEDS PROGRAMMABLE TWO RANGES
LOW RANGE ........................... 60 TO 520 RPM
HIGH RANGE .......................... 300 TO 1,650 RPM
LONGITUDINAL CARRIAGE TRAVEL .......... 54"
CROSS SLIDE TRAVEL .................... 10.8"
TAILSTOCK QUILL TRAVEL................. 5.91"
TAILSTOCK QUILL DIAMETER............... 2.95"
TAILSTOCK TAPER........................ #5MT
FLOOR SPACE REQUIRED................... 90" X 140"
APPROXIMATE WEIGHT..................... 8,000 LBS.
EQUIPPED WITH:
- FANUC 20-T CNC CONTROL
TEACH-IN / PLAYBACK OPERATION, FULL CNC OPERATION,
G CODE, CONSTANT SURFACE SPEED, INCH/METRIC, - HANDWHEELS
- TURN PARTS MANUALLY OR AUTOMATICALLY
- RS 232 PORT
- 3-JAW CHUCK
- DORIAN EIGHT POSITION PROGRAMMABLE INDEXING TURRET
- 15 HORSE POWER SPINDLE MOTOR
|
|
|
NOTE: Displayed on page Victor 2060 DCL 20 Swing 60 Centers Victor 2060 DCL CNC LATHE, Fanuc 20 T Control, Handwh is listed under ID# 19394 by Machinery Values Inc. in category CNC Lathes, Flat Bed. For any additional info regarding this Victor 2060 DCL please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
|
