|
Harig 618 AUTOSTEP
Listed For Sale at MachineKs.com in category - Surface Grinders. |
|
|
| |
|
| 6 Width 18 Length Harig 618 AUTOSTEP SURFACE GRINDER, PROGRAMMABLE AUTO I |
| Ad Id#: | 19555 | | Seller Ref.# | 153596 | | Model: | 618 AUTOSTEP | | Make: | Harig | | Year: | 1995 ( Used ) | | Price: | $0.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|
 |
| Description: |
6" X 18" HARIG "AUTOSTEP" (MADE IN THE USA)
SURFACE GRINDER WITH AUTOMATIC INCREMENTAL DOWNFEED
S/N: 8579-H NEW: 1994
WIDTH& LENGTH GROUND ........................ 6" X 18"
VERTICAL WORKING HEIGHT UNDER 7" WHEEL ............ 12"
LONGITUDINAL TABLE TRAVEL ..................... 18-3/4"
LONGITUDINAL TABLE SPEEDS ................ 0 TO 70 FPM
AUTO CROSS FEED PER TABLE PASS ............. 0 TO 3/32"
DOWNFEED OF GRINDING WHEEL RATE ............. 0.9"/MIN.
RAPID UP/DOWN TRAVERSE .................... 2-1/2"/MIN.
AUTO DOWNFEED INCREMENT PER PASS .... 0.0001" TO .0099"
GRINDING WHEEL ..................... 7" X 1/2" X 1-1/4"
MAXIMUM GRINDING WHEEL DIAMETER .................... 8"
FLOOR AREA OPERATING SPACE .................. 71" X 45"
APPROXIMATE WEIGHT .......................... 1,500 LBS
MACHINE FEATURES:
HARIG "AUTOSTEP III" AUTOMATIC INCREMENTAL DOWNFEED
CONTROL FEATURING:
-5 DIGIT THUMBWHEELS TO PRESET TOTAL DEPTH
-2 DIGIT THUMBWHEELS FOR SETTING DOWNFEED
INCREMENT FOR FEEDING @ BOTH LEFT & RIGHT, OR
LEFT ONLY OR RIGHT ONLY
-THUMBWHEEL TO PRESET 1 TO 9 AUTO SPARKOUT PASSES
-AUTOMATIC CYCLE INCLUDING RAPID RETURN STARTING
POSITION
-JOG BUTTON FOR REPOSITIONING 0.0001" PER JOG
-RAPID TRAVERSE BUTTON
-DIGITAL READOUT DISPLAY
-"AUTOSTEP III" FEEDS IN BOTH PLUNGE OR SURFACE
GRINDING MODES
HYDRAULIC TABLE TRAVERSE
ELECTRO-MECHANICAL CROSS FEED (DIAL CONTROLLED)
1.5 HP 3/60/208-230-460 VOLT HARIG SUPER-PRECISION DIRECT
DRIVE CARTRIDGE TYPE SPINDLE
EQUIPPED WITH:
"ACU-RITE" SINGLE AXIS DIGITAL READOUT DISPLAY
6" X 18" WALKER FINE-DIVISION PERMANENT MAGNETIC CHUCK
COOLANT SYSTEM, SMALL TANK & PUMP,
TUCKS IN THE BASE OF THE MACHINE ON THE RIGHT SIDE
MACHINE IS PRESENTLY WIRED FOR 3/60/460 VOLTS, CAN BE SWITCHED
TO 208 OR 230 VOLTS FOR $500 FEE.
PLEASE SEE LINK TO VIDEO OF MACHINE UNDER POWER.
http://youtu.be/wHhrLx7AX8M
** INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE **
** EXCEPTIONAL CONDITION & APPEARANCE |
|
|
NOTE: Displayed on page Harig 618 AUTOSTEP 6 Width 18 Length Harig 618 AUTOSTEP SURFACE GRINDER, PROGRAMMABLE AUTO I is listed under ID# 19555 by Machinery Values Inc. in category Surface Grinders. For any additional info regarding this Harig 618 AUTOSTEP please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
