|
OKUMA MILLAC 1000VH (STK 10275)
Listed For Sale at MachineKs.com in category - Machining Centers (Various Types). |
|
|
| |
|
| Okuma Millac 1000VH 5-axis Machining Center, Mfg:2013 Installed:2014 |
| Ad Id#: | 19748 | | Seller Ref.# | 10275 | | Model: | 1000VH (STK 10275) | | Make: | OKUMA MILLAC | | Year: | 2013 ( Used ) | | Price: | On Request | | Location: | USA |
| | | Listed By: | Jordan Craig Machinery | | Address: |
151 North Main Street Suite 203
10956 New City NY
USA
Phone: 845-398-0073
Fax: 845-398-0074
| |
|
 |
| Description: |
Okuma Millac 1000VH 5-axis Machining Center, Mfg:2013 Installed:2014
Specifications:
X-Axis 72.83"
Y-Axis 51.18"
Z-Axis 39.37"
Spindle nose to pallet top (spindle vertical) -3.94 to 35.43"
Spindle center to pallet center (spindle vertical) -22.83 to 50"
Spindle center to pallet top (spindle horizontal) 5.91 to 45.28"
Spindle nose to pallet center (spindle horizontal) -32.68 to 40.16"
Pallet: Max work dimension 39.37" x 39.37"
Max load capacity 4,400 Lbs
Indexing angle (any NC orientation) 0.001
Floor to pallet top 50.79"
Spindle: Spindle speed 100~10,000 RPM
Spindle taper hole CAT 50 Big+
Spindle swivel angle 150 degrees
Indexing angle (NC arbitrary indexing) 0.001
Motors: Spindle (30 min / cont) 30/25 HP
ATC: Tool shank Cat 50 Big+
Tool capacity 40
Max. tool diameter (w/ adjacent tool) 4,72"
Max. tool diameter (w/o adjacent tool) 9.45"
Max tool length/weight 19.6" / 55 Lbs
General: Length x Depth 204.33 x 279.53"
Height 166.3"
Weight 52,800 Lbs
Equipped With: 2- pallet rotary-shuttle automatic pallet changer
Full 5 Axis Simultaneous Capability
OSP-P300M Control
10,000 RPM Spindle Option
120 ATC
Cat 50 Big Plus Spindle Taper
Custom /walk around platform
B Axis, with .001 Degree Increment
Tool Breakage Detection
Auto Gauging with Renishaw Probe
Super Nurbs (Full 5 Axis Capability)
Inverse Time Feedrate
Spindle Prep for 1,000 PSI Through
MP Systems 1000 PSI Unit
Coolant Level Check
Shower Coolant
Tool Wear Offset (300 Sets)
3D Tool Compensation
3D Circular Interpolation
Slope Machining
Tool Length Compensation
Tool Life Management
Load Monitor
Tech Navi (control vibration/chattering)
Tool Point Control
Chip Conveyor, Lift Up Type Mayfran
Mist Extractor (recommended by Baldor)
Direct Drive Spindle
omments: New Today over US$1.3 Million
This machine is for sale so the owner can purchase a larger machine
2013 build / 2014 Installed - Very Low Hours
Purchased with all available options
Running Hours: 2494
Operating Hours: 900
Cutting Hours: 590
|
|
|
NOTE: Displayed on page OKUMA MILLAC 1000VH (STK 10275) Okuma Millac 1000VH 5-axis Machining Center, Mfg:2013 Installed:2014 is listed under ID# 19748 by Jordan Craig Machinery in category Machining Centers (Various Types). For any additional info regarding this OKUMA MILLAC 1000VH (STK 10275) please contact directly Jordan Craig Machinery.
|
© MACHINEKS.COM All Rights Reserved
|
-&zid=19748 "Okuma Millac 1000VH 5-axis Machining Center, Mfg:2013 Installed:2014 - click to enlarge")