| Bridgeport-Romi EZ PATH
Listed For Sale at MachineKs.com in category - CNC Lathes, Flat Bed. |
|
|
| |
|
| 17" Swing 40" Centers Bridgeport-Romi EZ PATH CNC LATHE, EZ-Path DX32 Cntrl,5C-Collet Closer,3- Jaw,DorianT | | Ad Id#: | 11148 | | Seller Ref.# | 143888 | | Model: | EZ PATH | | Make: | Bridgeport-Romi | | Year: | 1994 ( Used ) | | Price: | $14,500.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|  | | Description: |
16.5"" X 40"" BRIDGEPORT ROMI EZ PATH LATHE
w/EZ PATH PC BASED CONTROL
MODEL: EZ PATH, S/N: 002-078348-325, NEW: 1994
SPECIFICATIONS:
SWING OVER BED......................... 16.5""
DISTANCE BETWEEN CENTERS............... 40""
SWING OVER CROSS SLIDE................. 8.6""
SPINDLE NOSE........................... ASA A2-5""
SPINDLE BORE........................... 1.97""
SPINDLE SPEEDS (24):
HIGH RANGE (12 SPEEDS)............... 67 TO 3,000 RPM
LOW RANGE (12 SPEEDS)................ 37.5 TO 1,500 RPM
RAPID TRAVELS.......................... 250 IPM, (Z & X)
TAILSTOCK QUILL TRAVEL................. 6.3""
TAILSTOCK QUILL DIAMETER............... 2""
TAILSTOCK TAPER........................ #4MT
FLOOR SPACE REQUIRED................... 68"" X 110""
APPROXIMATE WEIGHT..................... 4,000 LBS.
EQUIPPED WITH:
- BRIDGEPORT EZ PATH CNC CONTROL, 32 BIT PROCESSOR WITH
120 MEGABITE HARD DRIVE
- TURN PARTS MANUALLY OR AUTOMATICALLY
- ""TEACH"" 1ST PART, RUN REMAINING PARTS AUTOMATICALLY
- 3.5"" FLOPPY DISK DRIVE & RS 232 PORT
- LEVER OPERATED 5C COLLET CLOSER
- 10"" 3-JAW CHUCK
- DORIAN TOOLPOST WITH MISCELLENOUS HOLDERS
- 8 HP SPINDLE MOTOR
- SET OF MANUALS
INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE
|
|
|
NOTE: Displayed on page Bridgeport-Romi EZ PATH 17" Swing 40" Centers Bridgeport-Romi EZ PATH CNC LATHE, EZ-Path DX32 Cntrl,5C-Collet Closer,3- Jaw,DorianT is listed under ID# 11148 by Machinery Values Inc. in category CNC Lathes, Flat Bed. For any additional info regarding this Bridgeport-Romi EZ PATH please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
|
