|
Okamoto ACC-8.20DX
Listed For Sale at MachineKs.com in category - Surface Grinders. |
|
|
| |
|
| 8Inch Width 20Inch Length Okamoto ACC-8.20DX SURFACE GRINDER, AUTO IDF, 3X AUTO F |
| Ad Id#: | 15171 | | Seller Ref.# | 146778 | | Model: | ACC-8.20DX | | Make: | Okamoto | | Year: | 1999 ( Used ) | | Price: | $0.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|
 |
| Description: |
8Inch X 20Inch OKAMOTO InchHIGH-PRECISIONInch SURFACE GRINDER
W/InchDXInch PROGRAMMABLE AUTO INCREMENTAL DOWNFEED
MODEL: ACC-820-DX S/N: 62406 NEW: 1999
NOMINAL GRINDING CAPACITY ..................... 12Inch x 24Inch
MAXIMUM HEIGHT UNDER 8Inch WHEEL ..................... 15.6Inch
TABLE SPEED, INFINITELY VARIABLE .......... UP TO 82 FPM
MAX. LONGITUDINAL TABLE MOVEMENT, MANUAL ............ 30Inch
AUTO CROSS FEED INCREMENT ................ 0.002Inch TO .80Inch
AUTO CONINOUS CROSSFEED ................... 4 TO 40 FPM
CROSSFEED, MANUAL, HAND FEED PER REV. ............. 0.25Inch
GRAD. OF HANDWHEEL ............ 0.001Inch
MAX. CROSSFEED, MANUAL .............................. 14Inch
AUTO INCREMENTAL DOWNFEED INCREMENTS .. 0.00005Inch TO .0015Inch
POWER RAPID WHEEL POSITIONING RATE .............. 16Inch IPM
SPINDLE MOTOR .................................... 2 H.P.
WHEEL SIZE ............................. 8Inch X 1Inch X 1- 1/4Inch
WHEEL SPEED ................................... 3,600 RPM
APPROX. MACHINE WEIGHT ........................ 4,000 LBS.
EQUIPPED WITH:
InchDXInch PROGRAMMABLE ELECTRONIC AUTO INCREMENTAL DOWNFEED:
-SERVO DRIVEN DOWNFEED
-AUTO INCREMENTAL DOWNFEED FOR BOTH SURFACE & PLUNGE
OPERATIONS
-DUAL RATE AUTO DOWNFEED W/COARSE & FINE SELECTIONS
-DIGITAL DISPLAY FOR VERTICAL AXIS
-SPARKOUT PASSES (0 TO 5) W/AUTO TABLE PARK AT
COMPLETION OF GRIND CYCLE
-ELECTRONIC HANDWHEEL FOR MANUAL VERTICAL MOVEMENT
W/EACH GRAD. EQUIVALENT TO .00001Inch, .0001Inch OR .001Inch
-POWER RAPID WHEEL POSITIONING
HYDRAULIC TABLE TRAVERSE
AUTOMATIC CROSSFEED
8Inch X 20Inch ELECTRO-MAGNETIC CHUCK
VARIABLE HOLD NEUTROFIER CONTROL & DEMAGNETIZER
COOLANT SYSTEM W/PAPER FILTRATION
OVER-THE-WHEEL DRESSER WITH MICROMETER ADJUSTMENT
2 H.P. SPINDLE MOTOR
MOTORS ARE 3/60/230-460 VOLT
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **
** EXCELLENT CONDITION & APPEARANCE **
|
|
|
NOTE: Displayed on page Okamoto ACC-8.20DX 8Inch Width 20Inch Length Okamoto ACC-8.20DX SURFACE GRINDER, AUTO IDF, 3X AUTO F is listed under ID# 15171 by Machinery Values Inc. in category Surface Grinders. For any additional info regarding this Okamoto ACC-8.20DX please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
