| Bridgeport M Head
Listed For Sale at MachineKs.com in category - Tooling & Accessories - Toolroom. |
|
|
| |
|
| 0.5 Bridgeport M Head TOOLING ITEM, 1 HP, 12,000 RPM | | Ad Id#: | 15204 | | Seller Ref.# | 146882 | | Model: | M Head | | Make: | Bridgeport | | Year: | ( Used ) | | Price: | $950.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|  | | Description: |
BRIDGEPORT 1 HP MILLING HEAD
MODEL InchMInch SERIAL NUMBER: M-25150
SPECIFICATIONS:
SPINDLE TAPER ................... #2 MT
OVERALL HEIGHT .................. 21-3/4Inch
OVERALL DEPTH ................... 17Inch
OVERALL WIDTH ................... 12-5/8Inch
COLLET CAPACITY ................. 1/2Inch
QUILL TRAVEL .................... 3-1/2Inch
SPEEDS: 950, 1350, 2200, 3250, 6500, 12,000 RPM
WEIGHT .......................... 99 Lbs NET OF PACKING
FEATURES:
- POSITIVE QUILL LOCK
- RACK & PINION FEED FOR DRILLING AND BORING
- SPINDLE HAS SIX SPLINES AND IS DRIVEN BY A PULLEY MOUNTED
ON SEPARATE BALL BEARINGS
- FOUR BOLT MOUNTING ASSURES RIGIDITY
- 1 HP 230/460 VOLT 3 PHASE MOTOR
THE MODEL InchMInch OR MASTER MILLING, DRILLING &
BORING HEAD IS A VERSATILE TOOL WHICH CAN BE USED
AT ALL ANGLES WITHOUT CHANGING THE WORK SETUP.
IT IS HIGHLY ACCURATE BECAUSE OF A COUNTERBALANCED
SPINDLE AND QUILL, AND PROVIDES FINE SENSITIVITY,
ESPECIALLY FOR DRILLING & BORING.
THIS UNIT CAN BE MOUNTED ON THE REAR END OF THE RAMS
OF BRJ AND BRM MACHINES WITH A SWIVEL
ADAPTER ABD PROVIDE ANGLE SETTINGS IN BOTH PLANES.
VERY GOOD CONDITION
|
|
|
NOTE: Displayed on page Bridgeport M Head 0.5 Bridgeport M Head TOOLING ITEM, 1 HP, 12,000 RPM is listed under ID# 15204 by Machinery Values Inc. in category Tooling & Accessories - Toolroom. For any additional info regarding this Bridgeport M Head please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
|
