|
Blanchard 42-84
Listed For Sale at MachineKs.com in category - Rotary Surface Grinders, Vertical Spindle. |
|
|
| |
|
| 72 Chuck 100HP Spindle Blanchard 42-84 ROTARY SURFACE GRINDER, UNDER POWER |
| Ad Id#: | 15362 | | Seller Ref.# | 147379 | | Model: | 42-84 | | Make: | Blanchard | | Year: | 1953 ( Used ) | | Price: | $0.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|
 |
| Description: |
72 BLANCHARD ROTARY SURFACE GRINDER
MODEL: #42-72-84, S/N: 7406, NEW: 1953
CHUCK DIAMETER .................................... 72
SWING INSIDE GUARDS ............................... 84
VERTICAL RANGE UNDER NEW WHEEL .................... 24
GRINDING WHEEL DIAMETER ........................... 42
GRINDING WHEEL SPEED .......................... 360 RPM
CHUCK SPEEDS:.................................... ... 4
INFINITELY VARIABLE POWER DOWNFEED .... 0.004 TO .080
APPROXIMATE DIMENSIONS.............192L X 92 W X 150H
APPROXIMATE WEIGHT ......................... 65,000 LBS
EQUIPPED WITH:
75 HP 3/60/230-460 VOLT SPINDLE MOTOR
MOTOR WAS REBUILT AND REWOUND FOR 100 HP OUTPUT IN 2006
READY-START SOFT SPINDLE START & DC BRAKING
NEW UPPER AND LOWER SPINDLE BEARINGS INSTALLED IN 2005
APPROXIMATE COST OF BEARINGS WAS $3,800.00 IN 2005
24 VERTICAL RANGE, UNDER NEW SEGMENTS WITH 8 HEIGHT
CURRENTLY MACHINE IS SET UP WITH COOLANT EXITING THRU
THE BOTTOM OF THE BASE TO AN EXTERNAL COOLANT TANK.
THE COOLANT TANK IS APPROXIMATELY 6 X 5 X 3 H,
THE UNIT COMES WITH A MAGNETIC SEPERATOR MANUFACTURED
BY CHEMAPERM MAGNETIC SEPARATOR ? MODEL MST-ACE-S40,
COOLANT SYSTEM INSTALLED NEW IN 1984
72 ELECTRO-MAGNETIC CHUCK WITH EXCELLENT CHUCK LIFE,
CHUCK LIFE IS 3/4
TRABON AUTOMATIC LUBRICATION SYSTEM FOR VERTICAL WAYS
& WHEELHEAD SPINDLE
VERY LATE ELECTRO-MATIC NEUTROFIER II VARIABLE HOLD
NEUTROFIER CONTROL & POWER SUPPLY
42 DIAMETER SEGMENTED WHEEL (CORTLAND)
DRESSER
WHEELHEAD HAS RAPID RAISE & LOWER BY POWER
INTERLOCKED WITH FEED.
MACHINE IS WIRED FOR 3/60/480 VOLTS
** MACHINE RUNS SUPERBLY, EXCEPTIONAL CONDITION & APPEARANCE **
** INSPECT UNDER POWER IN BRIDGEPORT, CT ** |
|
|
NOTE: Displayed on page Blanchard 42-84 72 Chuck 100HP Spindle Blanchard 42-84 ROTARY SURFACE GRINDER, UNDER POWER is listed under ID# 15362 by Machinery Values Inc. in category Rotary Surface Grinders, Vertical Spindle. For any additional info regarding this Blanchard 42-84 please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
